본문 바로가기
  • 보물창고에 보물이 가득할 때 까지
방재영역/화재 코드

UL Standard list

by Danny' 2019. 12. 11.
반응형

 

Standard Number Standard Title
1 Standard for Flexible Metal Conduit
4 Standard for Armored Cableaa
5 Standard for Surface Metal Raceways and Fittings
5A Nonmetallic Surface Raceways and Fittings
5B Standard for Strut-Type Channel Raceways and Fittings
5C Standard for Surface Raceways and Fittings for Use with Data, Signal, and Control Circuits
6 Electrical Rigid Metal Conduit - Steel
6A Electrical Rigid Metal Conduit - Aluminum, Red Brass, and Stainless Steel
7 Outline of Investigation for Pump Tank Extinguishers
8 Water Based Agent Fire Extinguishers
9 Standard for Fire Tests of Window Assemblies
10A Standard for Tin-Clad Fire Doors
10B Standard for Fire Tests of Door Assemblies
10C Standard for Positive Pressure Fire Tests of Door Assemblies
10D Standard for Fire Tests of Fire-Protective Curtain Assemblies
13 Standard for Power-Limited Circuit Cables
14B Standard for Sliding Hardware for Standard, Horizontally Mounted Tin-Clad Fire Doors
14C Standard for Swinging Hardware for Standard Tin-Clad Fire Doors Mounted Singly and in Pairs
19 Standard for Lined Fire Hose and Hose Assemblies
19G Guidance for Lined Fire Hose and Hose Assemblies
20 General-Use Snap Switches
21 Standard for LP-Gas Hose
22 Standard for Amusement and Gaming Machines
25 Standard for Meters for Flammable and Combustible Liquids and LP-Gas
25A Standard for Meters for Gasoline and Gasoline/Ethanol Blends with Nominal Ethanol Concentrations up to 85 Percent (E0 - E85)
25B Meters for Diesel Fuel, Biodiesel Fuel, Diesel/Biodiesel Blends with Nominal Biodiesel Concentrations up to 20 Percent (B20), Kerosene, and Fuel Oil
30 Standard for Metal Safety Cans
32 Standard for Metal Waste Cans
33 Standard for Heat Responsive Links for Fire-Protection Service
38 Standard for Manual Signaling Boxes for Fire Alarm Systems
44 Thermoset-Insulated Wires and Cables
45A Outline of Investigation for Transportable and Special Purpose Portable Electric Tools
47 Standard for Semiautomatic Fire Hose Storage Devices
48 Standard for Electric Signs
50 Enclosures for Electrical Equipment, Non-Environmental Considerations
50 Enclosures for Electrical Equipment, Non-Environmental Considerations
50E Enclosures for Electrical Equipment, Environmental Considerations
50E Enclosures for Electrical Equipment, Environmental Considerations
50V Outline of Investigation for Infrared Viewports
50V Outline of Investigation for Infrared Viewports
51 Standard for Power-Operated Pumps and Bypass Valves for Anhydrous Ammonia, LP-Gas, and Propylene
55A Standard for Materials for Built-Up Roof Coverings
58 Standard for Steel Underground Tanks for Flammable and Combustible Liquids
62 Flexible Cords and Cables
63 Outline of Investigation for Fire Door Frames
65 Standard for Wired Cabinets
66 Fixture Wire
67 Standard for Panelboards
69 Standard for Electric-Fence Controllers
70 Standard for Septic Tanks, Bituminous-Coated Metal
72 Standard for Tests for Fire Resistance of Record Protection Equipment
73 Standard for Motor-Operated Appliances
75 Outline for Portable Containers and Tanks for Flammable and/or Combustible Liquids
79 Standard for Power-Operated Pumps for Petroleum Dispensing Products
79A Standard for Power-Operated Pumps for Gasoline and Gasoline/Ethanol Blends with Nominal Ethanol Concentrations up to 85 Percent (E0 - E85)
79B Standard for Power-Operated Pumps for Diesel Fuel, Biodiesel Fuel, Diesel/Biodiesel Blends with Nominal Biodiesel Concentrations up to 20 Percent (B20), Kerosene, and Fuel Oil
80 Standard for Steel Tanks for Oil-Burner Fuels and Other Combustible Liquids
80.1 NONMETALLIC TANKS FOR OIL-BURNER FUELS AND OTHER COMBUSTIBLE LIQUIDS
82 Standard for Electric Gardening Appliances
83 Thermoplastic-Insulated Wires and Cables
83A Standard for Fluoropolymer Insulated Wire
87 Standard for Power-Operated Dispensing Devices for Petroleum Products
87A Standard for Power-Operated Dispensing Devices for Gasoline and Gasoline/Ethanol Blends with Nominal Ethanol Concentrations up to 85 Percent (E0 - E85)
87B Power-Operated Dispensing Devices for Diesel Fuel, Biodiesel Fuel, Diesel/Biodiesel Blends with Nominal Biodiesel Concentrations up to 20 Percent (B20), Kerosene, and Fuel Oil
87C Outline of Investigation for Power-Operated Dispensing Devices for Diesel Exhaust Fluid
92 Standard for Fire Extinguisher and Booster Hose
94 Standard for Tests for Flammability of Plastic Materials for Parts in Devices and Appliances
96 ANSI/CAN/UL Standard for Lightning Protection Components
96A Standard for Installation Requirements for Lightning Protection Systems
98 Enclosed and Dead-Front Switches
98A Outline of Investigation for Open Type Switches
98B Outline of Investigation for Enclosed and Dead-front Switches for use in Photovoltaic Systems
98C Outline of Investigation for Enclosed and Dead-Front Switches, 650 - 1000 Volts
100 SMOKE CONTROL SYSTEM EQUIPMENT
100 Standard for Sustainability for Gypsum Boards and Panels
101 Leakage Current for Appliances
102 STANDARD METHOD OF TEST FOR SURFACE BURNING CHARACTERISTICS OF BUILDING MATERIALS AND ASSEMBLIES
102 Standard for Sustainability for Door Leafs
102.2 STANDARD METHOD OF TEST FOR SURFACE BURNING CHARACTERISTICS OF FLOORING, FLOOR COVERINGS, AND MISCELLANEOUS MATERIALS AND ASSEMBLIES
102.3 STANDARD METHOD OF FIRE TEST OF LIGHT DIFFUSERS AND LENSES
102.4 STANDARD METHOD OF TEST FOR FIRE AND SMOKE CHARACTERISTICS OF ELECTRICAL WIRING, CABLES AND NON-METALLIC RACEWAYS
102.4 STANDARD METHOD OF TEST FOR FIRE AND SMOKE CHARACTERISTICS OF ELECTRICAL WIRING, CABLES AND NON-METALLIC RACEWAYS
103 Standard for Factory-Built Chimneys for Residential Type and Building Heating Appliances
103 STANDARD SPECIFICATION FOR “TIN-CLAD” FIRE DOORS MEETING THE PERFORMANCE REQUIRED BY CAN/ULC-S104
103A Outline of Investigation for Masonry Fireplace Adapters for Residential Type and Building Heating Appliance Chimneys
104 Standard for Elevator Door Locking Devices and Contacts
104 STANDARD METHOD FOR FIRE TESTS OF DOOR ASSEMBLIES
105 STANDARD SPECIFICATION FOR FIRE DOOR FRAMES MEETING THE PERFORMANCE REQUIRED BY CAN/ULC-S104
106 STANDARD METHOD FOR FIRE TESTS OF WINDOW AND GLASS BLOCK ASSEMBLIES
107 STANDARD METHODS OF FIRE TESTS OF ROOF COVERINGS
108 Environmental Claim Validation Procedure for Estimating Energy Savings for Energy Saving Power Strips
109 Standard for Tube Fittings for Flammable and Combustible Fluids, Refrigeration Service, and Marine Use
109 STANDARD METHOD FOR FLAME TESTS OF FLAME-RESISTANT FABRICS AND FILMS
110 STANDARD METHODS OF TEST FOR AIR DUCTS
110 Standard for Sustainability for Mobile Phones
111 Outline of Investigation for Multioutlet Assemblies
111 STANDARD METHOD OF FIRE TESTS FOR AIR FILTER UNITS
112 STANDARD METHOD OF FIRE TEST OF FIRE DAMPER ASSEMBLIES
112.1 STANDARD FOR LEAKAGE RATED DAMPERS FOR USE IN SMOKE CONTROL SYSTEMS
113 STANDARD SPECIFICATION FOR WOOD CORE DOORS MEETING THE PERFORMANCE REQUIRED BY CAN/ULC-S104 FOR TWENTY MINUTE FIRE RATED CLOSURE ASSEMBLIES
113 Procedure for the Preparation of a Toxicological Assessment
114 STANDARD METHOD OF TEST FOR DETERMINATION OF NON-COMBUSTIBILITY IN BUILDING MATERIALS
115 STANDARD METHOD OF FIRE TESTS OF FIRESTOP SYSTEMS
115 STANDARD METHOD OF FIRE TESTS OF FIRESTOP SYSTEMS
119 Outline of Investigation for Adapters, Fittings and Couplings for Anhydrous Ammonia and Fuel Gases
122 Standard for Photographic Equipment
123 Standard for Oxy-Fuel Gas Torches
124 Outline of Investigation for Hand-Operated Pumps for Flammable and Combustible Liquids
124 STANDARD METHOD OF TEST FOR THE EVALUATION OF THERMAL BARRIERS FOR FOAMED PLASTIC
125 Standard for Flow Control Valves for Anhydrous Ammonia and LP-Gas
126 STANDARD METHOD OF TEST FOR FIRE SPREAD UNDER ROOF-DECK ASSEMBLIES
126 Standard for Sustainability for Plastic Film Products
127 Standard for Factory-Built Fireplaces
127 STANDARD CORNER WALL METHOD OF TEST FOR FLAMMABILITY CHARACTERISTICS OF NON-MELTING FOAM PLASTIC BUILDING MATERIALS
129 STANDARD METHOD OF TEST FOR SMOULDER RESISTANCE OF INSULATION (BASKET METHOD)
130 Standard for Electric Heating Pads
130 STANDARD METHOD OF TEST FOR IGNITION RESISTANCE OF LOOSE FILL INSULATION (CIGARETTE METHOD)
132 Standard for Safety Relief Valves for Anhydrous Ammonia and LP-Gas
132 STANDARD METHOD OF TESTS FOR EMERGENCY EXIT AND EMERGENCY FIRE EXIT HARDWARE
133 STANDARD METHOD OF TESTS FOR DOOR CLOSERS INTENDED FOR USE WITH SWINGING DOORS
134 STANDARD METHOD OF FIRE TEST OF EXTERIOR WALL ASSEMBLIES
136 Standard for Pressure Cookers
139 Outline of Investigation for Medium- and High-Expansion Foam-Extinguishing System Equipment and Concentrates
139 Standard for Fire Test for Circuit Integrity of Fire-Resistive Power, Instrumentation, Control, and Data Cables
140 Standard for Relocking Devices for Safes and Vaults
141 Standard for Garment Finishing Appliances
142 Standard for Steel Aboveground Tanks for Flammable and Combustible Liquids
142 STANDARD METHOD OF FIRE TEST FOR HEAT AND VISIBLE SMOKE RELEASE FOR DISCRETE PRODUCTS
142.15 PRECAST CONCRETE TANKS
142A Standard for Special Purpose Aboveground Tanks for Specific Flammable or Combustible Liquids
143 STANDARD METHOD OF FIRE TESTS FOR NON-METALLIC ELECTRICAL AND OPTICAL FIBRE CABLE RACEWAY SYSTEMS
144 Standard for LP-Gas Regulators
144 STANDARD METHOD OF FIRE RESISTANCE TEST - GREASE DUCT ASSEMBLIES
145 STANDARD METHOD OF TEST FOR THE EVALUATION OF PROTECTIVE COVERINGS FOR FOAMED PLASTIC INSULATION - FULL-SCALE ROOM TEST
147 Standard for Hand-Held Torches for Fuel Gases
147A Standard for Nonrefillable (Disposable) Type Fuel Gas Cylinder Assemblies
147B Standard for Nonrefillable (Disposable) Type Metal Container Assemblies for Butane
150 Standard for Antenna Rotators
153 Standard for Portable Electric Luminaires
154 Carbon-Dioxide Fire Extinguishers
155 Standard for Tests for Fire Resistance of Vault and File Room Doors
157 Standard for Gaskets and Seals
162 Standard for Foam Equipment and Liquid Concentrates
162A Outline of Investigation for Fixed Water-Motor Coupled Pumps for Foam Concentrate Proportioning
172 Standard for Sustainability for Toys
174 Standard for Household Electric Storage Tank Water Heaters
175 Standard for Sustainability for Sanitary Paper Products
180 Standard for Combustible Liquid Tank Accessories
181 Standard for Factory-Made Air Ducts and Air Connectors
181A Standard for Closure Systems for Use With Rigid Air Ducts
181B Standard for Closure Systems for Use With Flexible Air Ducts and Air Connectors
183 Standard for Manufactured Wiring Systems
193 Standard for Alarm Valves for Fire-Protection Service
194 Standard for Gasketed Joints for Ductile-Iron Pipe and Fittings for Fire Protection Service
197 Standard for Commercial Electric Cooking Appliances
198M Standard for Mine-Duty Fuses
199 Standard for Automatic Sprinklers for Fire-Protection Service
199B Control Cabinets For Automatic Sprinkler Systems Used For Protection Of Commercial Cooking Equipment
199C Outline of Investigation for Plastic Escutcheons for Sprinklers
199D Outline of Investigation for Guards for Sprinklers
199E Outline of Investigation for Fire Testing of Sprinklers and Water Spray Nozzles for Protection of Deep Fat Fryers
199G Outline of Investigation for Fire Testing of Specific Application Sprinklers for Use in Attic Spaces
199H Outline of Investigation for Fire Testing Of Specific Application Sprinklers For Use In Horizontal Concealed Spaces
199J Outline of Investigation for Fire Testing of Specific Application Sprinklers for Use on Windows
201 Standard for Garage Equipment
203 Standard for Pipe Hanger Equipment for Fire Protection Service
203A Standard for Sway Brace Devices for Sprinkler System Piping
207 Standard for Refrigerant-Containing Components and Accessories, Nonelectrical
209 Standard for Cellular Metal Floor Raceways and Fittings
212 Outline of Investigation for Hand-Operated Chemical Pumps
213 Standard for Rubber Gasketed Fittings for Fire-Protection Service
213 Standard for Rubber Gasketed Fittings for Fire-Protection Service
213B Outline of Investigation for Welded Outlet Fittings for Fire Protection Systems
213C Standard for Grooved and Plain End Fittings
217 Standard for Smoke Alarms
218 Fire Pump Controllers
218A Standard for Battery Contactors for Use in Diesel Engines Driving Centrifugal Fire Pumps
219 Standard for Lined Fire Hose for Interior Standpipes
224 Extruded Insulating Tubing
228 Standard for Door Closers-Holders, With or Without Integral Smoke Detectors
231 Standard for Power Outlets
234 Standard for Low Voltage Lighting Fixtures for Use in Recreational Vehicles
242 Standard for Nonmetallic Containers for Waste Paper
244A Standard for Solid-State Controls for Appliances
244B Outline of Investigation for Cord-Connected Controls with Standard NEMA Plugs and Receptacles, Direct Plug-In Controls, and Controls Intended to be Mounted in Wiring Boxes
246 Standard for Hydrants for Fire-Protection Service
246A Outline of Investigation for Non-Threaded Connections for Fire Hydrants and Fire Department Connections
246B Outline of Investigation for Tamper Resistant Features of Hydrants for Fire-Protection Service
246C Outline of Investigation for Wet Barrel Fire Hydrants for Oil Platforms
248-1 Low-Voltage Fuses - Part 1: General Requirements
248-2 Low-Voltage Fuses - Part 2: Class C Fuses
248-3 Low-Voltage Fuses - Part 3: Class CA and CB Fuses
248-4 Low-Voltage Fuses - Part 4: Class CC Fuses
248-5 Low-Voltage Fuses - Part 5: Class G Fuses
248-6 Low-Voltage Fuses - Part 6: Class H Non-Renewable Fuses
248-7 Low-Voltage Fuses - Part 7: Class H Renewable Fuses
248-8 Low-Voltage Fuses - Part 8: Class J Fuses
248-9 Low-Voltage Fuses - Part 9: Class K Fuses
248-10 Low-Voltage Fuses - Part 10: Class L Fuses
248-11 Low-Voltage Fuses - Part 11: Plug Fuses
248-12 Low-Voltage Fuses - Part 12: Class R Fuses
248-13 Low-Voltage Fuses - Part 13: Semiconductor Fuses
248-14 Low-Voltage Fuses - Part 14: Supplemental Fuses
248-15 Low-Voltage Fuses - Part 15: Class T Fuses
248-16 Low-Voltage Fuses - Part 16: Test Limiters
248-17 Outline of Investigation for Low-Voltage Fuses - Part 17: Class CF Fuses
248-18 Outline of Investigation for Low Voltage Fuses - Class CD Fuses
248-19 Low-Voltage Fuses - Part 19: Photovoltaic Fuses
248-20 Outline of Investigation for Low-Voltage Fuses - Part 20: Electric Vehicle (EV) Fuses
252 Standard for Compressed Gas Regulators
252A Standard for Compressed Gas Regulator Accessories
258 Outline of Investigation for Shutoff Valves for Trim and Drain Purposes
260 Standard for Dry Pipe and Deluge Valves for Fire-Protection Service
260A Outline of Investigation for Air Pressure Maintenance Devices
262 Standard for Gate Valves for Fire-Protection Service
263 Standard for Fire Tests of Building Construction and Materials
267 Outline of Investigation for Wire-Pulling Compounds
268 Smoke Detectors for Fire Alarm Systems
268 Smoke Detectors for Fire Alarm Systems
268A Standard for Smoke Detectors for Duct Application
268B Outline of Investigation for Video Image Smoke Detectors
268C Outline of Investigation for Multi-Detector Test Apparatus
275 Standard for Automotive Glass-Tube Fuses
275A Outline of Investigation for Automotive Blade Type Fuses
283 Standard for Air Fresheners and Deodorizers
291 Standard for Automated Teller Systems
293 Outline of Investigation for Performance of Access Control System Units Intended for Use in the UK
294 Standard for Access Control System Units
294 Standard for Access Control System Units
294B Standard for Power Over Ethernet (PoE) Power Sources for Access Control Systems and Equipment
295 Standard for Commercial-Industrial Gas Burners
296 Standard for Oil Burners
296A Standard for Waste Oil-Burning Air-Heating Appliances
299 Dry Chemical Fire Extinguishers
299A Outline of Investigation for Portable Dry Chemical Extinguishing System Units
299B Outline of Investigation for Dry Chemical Fire Extinguishers for U.S. Navy Applications
299C Outline of Investigation for Fire Extinguishing Dry Chemical for Special Applications
299D Outline of Investigation for Dry Chemical Fire Extinguishers for Residential Cooking Equipment
300 Standard for Fire Testing of Fire Extinguishing Systems for Protection of Commercial Cooking Equipment
300A Outline of Investigation for Extinguishing System Units for Residential Range Top Cooking Surfaces
301 STANDARD FOR SIGNAL RECEIVING CENTRES CONFIGURATIONS AND OPERATIONS
302 STANDARD FOR THE INSTALLATION, INSPECTION AND TESTING OF INTRUSION ALARM SYSTEMS
304 STANDARD FOR CONTROL UNITS, ACCESSORIES AND RECEIVING EQUIPMENT FOR INTRUSION ALARM SYSTEMS
305 Standard for Panic Hardware
307A Standard for Liquid Fuel-Burning Heating Appliances for Manufactured Homes and Recreational Vehicles
307B Standard for Gas-Burning Heating Appliances For Manufactured Homes and Recreational Vehicles
310 Electrical Quick-Connect Terminals
312 Standard for Check Valves for Fire-Protection Service
316 STANDARD FOR PERFORMANCE OF VIDEO SURVEILLANCE SYSTEMS
321 Outline of Investigation for Pipeline Strainers
325 ANSI/CAN/UL Standard for Door, Drapery, Gate, Louver, and Window Operators and Systems
327 Outline of Investigation for Turbine Type Flow Meters for Fire Protection Systems
327A Outline of Investigation for Inferential Type Residential Water Flow Meters
327B Outline of Investigation for Ultrasonic and Magnetic Type Water Flow Meters
328 Outline of Investigation for Gasoline Torches
330 Standard for Hose and Hose Assemblies for Dispensing Flammable Liquids
330A Standard for Hose and Hose Assemblies for Use With Dispensing Devices Dispensing Gasoline and Gasoline/Ethanol Blends With Nominal Ethanol Concentrations Up To 85 Percent (E0 - E85)
330B Standard for Hose and Hose Assemblies for Use With Dispensing Devices Dispensing Diesel Fuel, Biodiesel Fuel, Diesel/Biodiesel Blends With Nominal Biodiesel Concentrations Up To 20 Percent (B20), Kerosene, and Fuel Oil
331 Standard for Strainers for Flammable Fluids and Anhydrous Ammonia
331A Standard for Strainers for Gasoline and Gasoline/Ethanol Blends with Nominal Ethanol Concentrations up to 85 Percent (E0 - E85)
331B Strainers for Diesel Fuel, Biodiesel Fuel, Diesel/Biodiesel Blends with Nominal Biodiesel Concentrations up to 20 Percent (B20), Kerosene, and Fuel Oil
331C Outline of Investigation for Fuel Filtration Units
334 Theater Lighting Distribution and Control Equipment
338 STANDARD FOR AUTOMOBILE THEFT DETERRENT EQUIPMENT AND SYSTEMS: ELECTRONIC IMMOBILIZATION
340 Standard for Tests for Comparative Flammability of Liquids
343 Standard for Pumps for Oil-Burning Appliances
346 Standard for Waterflow Indicators for Fire Protective Signaling Systems
347 Medium-Voltage AC Contactors, Controllers, and Control Centers
347A Standard for Medium Voltage Power Conversion Equipment
347B Outline of Investigation for Medium Voltage Motor Controllers, Up To 15KV
347C Outline of Investigation for Medium Voltage Solid State Resistive Load Controllers, Up to 15KV
347D Outline of Investigation for Medium Voltage Stator Switching Assemblies for Wind Applications, Up to 15KV
353 Standard for Limit Controls
355 Standard for Cord Reels
360 Standard for Liquid-Tight Flexible Metal Conduit
363 Knife Switches
365 Standard for Police Station Connected Burglar Alarm Units and Systems
372 Automatic Electrical Controls for Household and Similar Use - Part 2: Particular Requirements for Burner Ignition Systems and Components
372 Standard for Primary Safety Controls for Gas- and Oil-Fired Appliances
378 Standard for Draft Equipment
379 Standard for Power Units for Fountain, Swimming Pool, and Spa Luminaires
385 Standard for Play Pipes for Water Supply Testing in Fire Protection Service
386 FLAME DETECTORS
391 Standard for Solid-Fuel and Combination-Fuel Central and Supplementary Furnaces
393 Standard for Indicating Pressure Gauges for Fire-Protection Service
399 Standard for Drinking-Water Coolers
401 Standard for Portable Spray Hose Nozzles for Fire-Protection Service
404 Standard for Gauges, Indicating Pressure, for Compressed Gas Service
405 Standard for Fire Department Connection Devices
407 Standard for Manifolds for Compressed Gases
410 Standard for Slip Resistance of Floor Surface Materials
412 Standard for Refrigeration Unit Coolers
414 Standard for Meter Sockets
416 Standard for Refrigerated Medical Equipment
420 LIGHT EMITTING DIODE (LED) EQUIPMENT FOR USE IN LIGHTING PRODUCTS
427 Standard for Refrigerating Units
428A Standard for Electrically Operated Valves for Gasoline and Gasoline/Ethanol Blends with Nominal Ethanol Concentrations Up to 85 Percent (E0 - E85)
428B Standard for Electrically Operated Valves for Diesel Fuel, Biodiesel Fuel, Diesel/Biodiesel Blends with Nominal Biodiesel Concentrations Up To 20 Percent (B20), Kerosene, and Fuel Oil
429 Standard for Electrically Operated Valves
429 Standard for Electrically Operated Valves
429A Outline of Investigation for Electrically Operated Valves for Fire Protection Service
430 Standard for Waste Disposers
437 Standard for Key Locks
441 Standard for Gas Vents
443 Standard for Steel Auxiliary Tanks for Oil-Burner Fuel
444 Communications Cables
448 Standard for Centrifugal Stationary Pumps for Fire-Protection Service
448A Standard for Flexible Couplings and Connecting Shafts for Stationary Fire Pumps
448B Standard for Residential Fire Pumps Intended for One- and Two-Family Dwellings and Manufactured Homes
448C Standard for Stationary, Rotary-Type, Positive-Displacement Pumps for Fire-Protection Service
448D Outline of Investigation for Fire Pump, Driver and Controller Assembly Rating Compatibility
452 Standard for Antenna - Discharge Units
458 Standard for Power Converters/Inverters and Power Converter/Inverter Systems for Land Vehicles and Marine Crafts
458A Outline of Investigation for Power Converters/Inverters for Electric Land Vehicles
462 Standard for Heat Reclaimers for Gas-, Oil-, or Solid Fuel-Fired Appliances
464 Audible Signaling Devices for Fire Alarm and Signaling Systems, Including Accessories
464A Standard for Audible Signal Appliances for General Signaling Use
466 Standard for Electric Scales
467 Grounding and Bonding Equipment
469 Standard for Musical Instruments and Accessories
471 Standard for Commercial Refrigerators and Freezers
482 Standard for Portable Sun/Heat Lamps
484 Standard for Room Air Conditioners
486A-486B Wire Connectors
486C Splicing Wire Connectors
486D Sealed Wire Connector Systems
486E Standard for Equipment Wiring Terminals for Use with Aluminum and/or Copper Conductors
486F Bare and Covered Ferrules
486G Sealed Twist-On Connecting Devices
489 Molded-Case Circuit Breakers, Molded-Case Switches, and Circuit-Breaker Enclosures
489A Standard for Circuit Breakers for Use in Communications Equipment
489B Molded-Case Circuit Breakers, Molded-Case Switches, and Circuit-Breaker Enclosures for Use with Photovoltaic (PV) Systems
489C Outline of Investigation for Molded-Case Circuit Breakers and Molded-Case Switches for Use with Wind Turbines
489D Outline of Investigation for US Naval Commercial-Off-The-Shelf (COTS) Designated Molded-Case Circuit Breakers and Accessories for Use on Non-Nuclear Naval Combatant Ships
489F Outline of Investigation for Molded-Case Circuit Breakers and Molded-Case Switches for Use with Battery Power Supplies
489G Outline of Investigation for Molded-Case Circuit Breakers, Molded-Case Switches, and Circuit-Breaker Enclosures, 650 - 1000 Volts AC and 650 - 1500 Volts DC
489H Outline of Investigation for Molded-Case Circuit Breakers, Molded-Case Switches, and Circuit-Breaker Enclosures, for Use with Direct Current (DC) Microgrids
489I Outline of Investigation for Solid State Molded-Case Circuit Breakers
493 Standard for Thermoplastic-Insulated Underground Feeder and Branch-Circuit Cables
495 Standard for Power-Operated Dispensing Devices for LP-Gas
496 Lampholders
497 Standard for Protectors for Paired-Conductor Communications Circuits
497A Standard for Secondary Protectors for Communications Circuits
497B Standard for Protectors for Data Communications and Fire-Alarm Circuits
497C Standard for Protectors for Coaxial Communications Circuits
497D Outline of Investigation for Component Secondary Protectors for Communications Circuits Used with Specified Voltage Supression
497E Outline of Investigation for Protectors for Antenna Lead-In Conductors
498 Standard for Attachment Plugs and Receptacles
498A Current Taps and Adapters
498B Outline of Investigation for Receptacles with Integral Switching Means
498C Flatiron and Appliance Plugs
499 Standard for Electric Heating Appliances
503 Standard for Carbon-Dioxide Fire Extinguishers
504 Dry Chemical Fire Extinguishers
504 Outline of Investigation for Mineral-Insulated, Metal-Sheathed Cable
506 Standard for Specialty Transformers
507 Standard for Electric Fans
507 Water Fire Extinguishers
508 Standard for Industrial Control Equipment
508 Rating and Fire Testing of Fire Extinguishers
508 Standard for Rating and Fire Testing of Fire Extinguishers
508A Standard for Industrial Control Panels
508B Outline of Investigation for Relays Used in Information Technology Equipment
508C Standard for Power Conversion Equipment
508E Outline of Investigation for IEC Type '2' Coordination Short Circuit Tests of Electromechanical Motor Controllers in Accordance with IEC Publication 947-4-1
508I Outline of Investigation for Disconnect Switches Intended for Use in Photovoltaic Systems
509 Outline of Investigation for Bus Drop Cable
510 Standard for Polyvinyl Chloride, Polyethylene and Rubber Insulating Tape
510A Standard for Component Tapes
511 STANDARD FOR LINED FIRE HOSE FOR INTERIOR STANDPIPES AND MUNICIPAL AND INDUSTRIAL FIRE PROTECTION SERVICES
513 STANDARD FOR THREADED COUPLINGS FOR 38 MM AND 65 MM FIRE HOSE
514 STANDARD FOR DRY CHEMICAL FOR USE IN HAND AND WHEELED FIRE EXTINGUISHERS
514A Metallic Outlet Boxes
514B Conduit, Tubing, and Cable Fittings
514C Standard for Nonmetallic Outlet Boxes, Flush-Device Boxes, and Covers
514D Cover Plates for Flush-Mounted Wiring Devices
515 STANDARD FOR AUTOMOBILE FIRE FIGHTING APPARATUS
515 Standard for Electrical Resistance Trace Heating for Commercial Applications
515A Outline of Investigation for Electrical Resistance Trace Heating and Associated Controls for Use In Sprinkler and Standpipe Systems
518 STANDARD FOR COTTON-SYNTHETIC NON-PERCOLATING FORESTRY HOSE
518.1 SYNTHETIC NON-PERCOLATING FORESTRY HOSE
519 STANDARD FOR COTTON-SYNTHETIC PERCOLATING FORESTRY HOSE
519.1 STANDARD FOR SYNTHETIC PERCOLATING FORESTRY HOSE
520 STANDARD FOR FIRE HYDRANTS
521 Standard for Heat Detectors for Fire Protective Signaling Systems
522 STANDARD FOR FIRE EXTINGUISHER AND BOOSTER HOSE
523 Outline of Investigation for Telephone Service Drop Wire
524 STANDARD FOR INSTALLATION OF FIRE ALARM SYSTEMS
525 Standard for Flame Arresters
525 Audible Signaling Devices for Fire Alarm and Signaling Systems, Including Accessories
526 Visible Signaling Devices for Fire Alarm and Signaling Systems, Including Accessories
527 STANDARD FOR CONTROL UNITS FOR FIRE ALARM SYSTEMS
528 STANDARD FOR MANUAL STATIONS FOR FIRE ALARM SYSTEMS, INCLUDING ACCESSORIES
529 Standard for Smoke Detectors for Fire Alarm Systems
529A VIDEO IMAGE SMOKE DETECTION SYSTEM DEVICES
530 STANDARD FOR HEAT ACTUATED FIRE DETECTORS FOR FIRE ALARM SYSTEMS
531 STANDARD FOR SMOKE ALARMS
532 STANDARD FOR THE REGULATION OF THE SERVICING OF PORTABLE FIRE EXTINGUISHERS
533 STANDARD FOR EGRESS DOOR SECURING AND RELEASING DEVICES
536 Standard for Flexible Metallic Hose
536 STANDARD FOR INSPECTION AND TESTING OF FIRE ALARM SYSTEMS
537 STANDARD FOR VERIFICATION OF FIRE ALARM SYSTEMS
539 Standard for Single and Multiple Station Heat Alarms
539 SINGLE AND MULTIPLE STATION HEAT ALARMS
540 STANDARD FOR RESIDENTIAL FIRE AND LIFE SAFETY WARNING SYSTEMS: INSTALLATION, INSPECTION, TESTING AND MAINTENANCE
541 Standard for Refrigerated Vending Machines
541 Speakers for Fire Alarm and Signaling Systems, Including Accessories
542 Standard for Fluorescent Lamp Starters
546 Outline of Investigation for Conductor Termination Compounds
548 STANDARD FOR DEVICES AND ACCESSORIES FOR WATER TYPE EXTINGUISHING SYSTEMS
551 Standard for Transformer-Type Arc-Welding Machines
551 STANDARD FOR FORGED EXTERNAL-LUG QUICK CONNECT COUPLINGS AND ADAPTORS FOR FORESTRY FIRE HOSE
552 STANDARD FOR INSPECTION, TESTING AND MAINTENANCE OF SMOKE ALARMS
553 STANDARD FOR INSTALLATION OF SMOKE ALARMS
554 Standard for Water Based Agent Fire Extinguishers
555 Standard for Fire Dampers
555 STANDARD FOR FIRE AND EMERGENCY SERVICE TECHNICAL RESCUE ROPES AND WATER RESCUE THROW ROPES AND ASSOCIATED EQUIPMENT
555C Standard for Ceiling Dampers
555S Standard for Smoke Dampers
557 STANDARD FOR BACK-PACK FIRE EXTINGUISHERS
558 Standard for Industrial Trucks, Internal Combustion Engine-Powered
558 STANDARD FOR EXTERNAL-LUG QUICK CONNECT COUPLINGS AND ADAPTORS FOR FORESTRY FIRE HOSE
559 STANDARD FOR EQUIPMENT FOR FIRE SIGNAL RECEIVING CENTRES AND SYSTEMS
561 Standard for Floor-Finishing Machines
561 STANDARD FOR INSTALLATION AND SERVICES FOR FIRE SIGNAL RECEIVING CENTRES AND SYSTEMS
563 Standard for Ice Makers
565 Standard for Liquid-Level Gauges for Anhydrous Ammonia and LP-Gas
566 Halocarbon Clean Agent Fire Extinguishers
567 Standard for Emergency Breakaway Fittings, Swivel Connectors and Pipe-Connection Fittings for Petroleum Products and LP-Gas
567A Standard for Emergency Breakaway Fittings, Swivel Connectors and Pipe-Connection Fittings for Gasoline and Gasoline/Ethanol Blends with Nominal Ethanol Concentrations up to 85 Percent (E0 - E85)
567B Standard for Emergency Breakaway Fittings, Swivel Connectors and Pipe-Connection Fittings for Diesel Fuel, Biodiesel Fuel, Diesel/Biodiesel Blends with Nominal Biodiesel Concentrations up to 20 Percent (B20), Kerosene, and Fuel Oil
568 Nonmetallic Cable Tray Systems
569 Standard for Pigtails and Flexible Hose Connectors for LP-Gas
572 STANDARD FOR PHOTOLUMINESCENT AND SELF-LUMINOUS EXIT SIGNS AND PATH MARKING SYSTEMS
573 STANDARD FOR INSTALLATION OF ANCILLARY DEVICES CONNECTED TO FIRE ALARM SYSTEMS
574 Standard for Electric Oil Heaters
574 STANDARD FOR FORGED 65 mm (2 1/2 in) EXTERNAL-LUG QUICK-CONNECT COUPLINGS AND ADAPTERS FOR FORESTRY FIRE HOSE
576 STANDARD FOR MASS NOTIFICATION SYSTEM EQUIPMENT AND ACCESSORIES
580 Standard for Tests for Uplift Resistance of Roof Assemblies
583 Standard for Electric-Battery-Powered Industrial Trucks
586 Standard for Safety for High-Efficiency, Particulate, Air Filter Units
588 Standard for Seasonal and Holiday Decorative Products
588 STANDARD FOR GAS AND VAPOUR DETECTORS AND SENSORS, INCLUDING ACCESSORIES
601 STANDARD FOR SHOP FABRICATED STEEL ABOVEGROUND TANKS FOR FLAMMABLE AND COMBUSTIBLE LIQUIDS
602 STANDARD FOR ABOVEGROUND STEEL TANKS FOR FUEL OIL AND LUBRICATING OIL
603 Standard for Power Supplies for Use with Burglar-Alarm Systems
603 STANDARD FOR STEEL UNDERGROUND TANKS FOR FLAMMABLE AND COMBUSTIBLE LIQUIDS
603.1 STANDARD FOR EXTERNAL CORROSION PROTECTION SYSTEMS FOR STEEL UNDERGROUND TANKS FOR FLAMMABLE AND COMBUSTIBLE LIQUIDS
603.1 EXTERNAL CORROSION PROTECTION SYSTEMS FOR STEEL UNDERGROUND TANKS FOR FLAMMABLE AND COMBUSTIBLE LIQUIDS
604 STANDARD FOR FACTORY- BUILT TYPE A CHIMNEYS
605 STANDARD FOR GAS VENTS
606 Linings and Screens for Use with Burglar-Alarm Systems
608 Standard for Burglary Resistant Vault Doors and Modular Panels
609 Standard for Local Burglar Alarm Units and Systems
609 STANDARD FOR LOW TEMPERATURE VENTS TYPE L AND PL
610 STANDARD FOR FACTORY-BUILT FIREPLACE SYSTEMS
612 STANDARD FOR HOSE AND HOSE ASSEMBLIES FOR FLAMMABLE AND COMBUSTIBLE LIQUIDS
618 Standard for Concrete Masonry Units
620 STANDARD FOR HOSE NOZZLE VALVES FOR FLAMMABLE AND COMBUSTIBLE LIQUIDS
621 Standard for Ice Cream Makers
626 Water Fire Extinguishers
629 STANDARD FOR 650 °C FACTORY- BUILT CHIMNEYS
633 STANDARD FOR FLEXIBLE CONNECTOR PIPING FOR FUELS
634 Standard for Connectors and Switches for Use with Burglar-Alarm Systems
634 STANDARD FOR HOSE SWIVEL CONNECTORS FOR FLAMMABLE AND COMBUSTIBLE LIQUIDS
634 CONNECTORS AND SWITCHES FOR USE WITH BURGLAR ALARM SYSTEMS
635 Standard for Insulating Bushings
635 STANDARD FOR LINING SYSTEMS FOR EXISTING MASONRY OR FACTORY-BUILT CHIMNEYS AND VENTS
636 Standard for Holdup Alarm Units and Systems
639 Standard for Intrusion-Detection Units
639 STANDARD FOR STEEL LINER ASSEMBLIES FOR SOLID-FUEL BURNING MASONRY FIREPLACES
640 STANDARD FOR LINING SYSTEMS FOR NEW MASONRY CHIMNEYS
641 Standard for Type L Low-Temperature Venting Systems
641 STANDARD FOR FACTORY-BUILT CHIMNEY CONNECTORS AND WALL PASS-THROUGH ASSEMBLIES
642 STANDARD FOR COMPOUNDS AND TAPES FOR THREADED PIPE JOINTS
644 Standard for Container Assemblies for LP-Gas
644 STANDARD FOR EMERGENCY BREAKAWAY FITTINGS FOR FLAMMABLE AND COMBUSTIBLE LIQUIDS
646 STANDARD FOR EXHAUST HOODS AND RELATED CONTROLS FOR COMMERCIAL AND INSTITUTIONAL COOKING EQUIPMENT
647 Standard for Unvented Kerosene-Fired Room Heaters and Portable Heaters
647A Outline of Investigation for Synthetic Fuels for Listed Kerosene-Fired Portable Heaters and Kerosene-Fired Room Heaters
651 Standard for Schedule 40, 80, Type EB and A Rigid PVC Conduit and Fittings
651 STANDARD FOR EMERGENCY VALVES FOR FLAMMABLE AND COMBUSTIBLE LIQUIDS
651A Schedule 40 and 80 High Density Polyethylene (HDPE) Conduit
652 STANDARD FOR TANK ASSEMBLIES FOR THE COLLECTION, STORAGE AND REMOVAL OF USED OIL
653 STANDARD FOR ABOVEGROUND HORIZONTAL STEEL CONTAINED TANK ASSEMBLIES FOR FLAMMABLE AND COMBUSTIBLE LIQUIDS
655 STANDARD FOR ABOVEGROUND PROTECTED TANK ASSEMBLIES FOR FLAMMABLE AND COMBUSTIBLE LIQUIDS
656 STANDARD FOR OIL-WATER SEPARATORS
661 STANDARD FOR OVERFILL PROTECTION DEVICES FOR FLAMMABLE AND COMBUSTIBLE LIQUID STORAGE TANKS
663 STANDARD FOR SPILL CONTAINMENT DEVICES FOR FLAMMABLE AND COMBUSTIBLE LIQUID ABOVEGROUND STORAGE TANKS
664 STANDARD FOR CONTAINMENT SUMPS, SUMP FITTINGS, AND ACCESSORIES FOR FLAMMABLE AND COMBUSTIBLE LIQUIDS
667 METALLIC UNDERGROUND PIPING FOR FLAMMABLE AND COMBUSTIBLE LIQUIDS
668 Standard for Hose Valves for Fire-Protection Service
668 STANDARD FOR LINERS USED FOR SECONDARY CONTAINMENT OF ABOVEGROUND FLAMMABLE AND COMBUSTIBLE LIQUID TANKS
669 STANDARD FOR INTERNAL RETROFIT SYSTEMS FOR UNDERGROUND TANKS FOR FLAMMABLE AND COMBUSTIBLE LIQUIDS
670 STANDARD FOR ABOVEGROUND NONMETALLIC TANKS FOR FUEL OIL AND OTHER COMBUSTIBLE LIQUIDS
674 Electric Motors and Generators for Use in Hazardous (Classified) Locations
674 STANDARD FOR UNVENTED ALCOHOL FUEL BURNING DECORATIVE APPLIANCES
675.1 STANDARD FOR VOLUMETRIC LEAK DETECTION DEVICES FOR UNDERGROUND AND ABOVEGROUND STORAGE TANKS FOR FLAMMABLE AND COMBUSTIBLE LIQUIDS
675.2 STANDARD FOR NONVOLUMETRIC PRECISION LEAK DETECTION DEVICES FOR UNDERGROUND AND ABOVEGROUND STORAGE TANKS AND PIPING FOR FLAMMABLE AND COMBUSTIBLE LIQUIDS
676 Standard for Underwater Luminaires and Submersible Junction Boxes
676 STANDARD FOR REFURBISHING OF STORAGE TANKS FOR FLAMMABLE AND COMBUSTIBLE LIQUIDS
676A Outline of Investigation for Potting Compounds for Swimming Pool, Fountain, and Spa Equipment
677 STANDARD FOR FIRE TESTED ABOVEGROUND TANK ASSEMBLIES FOR FLAMMABLE AND COMBUSTIBLE LIQUIDS
679 STANDARD FOR METALLIC AND NONMETALLIC UNDERGROUND PIPING FOR FLAMMABLE AND COMBUSTIBLE LIQUIDS
680 Standard for Emergency Vault Ventilators and Vault-Ventilating Ports
681 Standard for Installation and Classification of Burglar and Holdup Alarm Systems
687 Standard for Burglary-Resistant Safes
693 Outline of Investigation for Excess Pressure Pumps for Wet Pipe Sprinkler Systems
696 Standard for Electric Toys
697 Standard for Toy Transformers
698A Standard for Industrial Control Panels Relating to Hazardous (Classified) Locations
701 STANDARD FOR THERMAL INSULATION, POLYSTYRENE, BOARDS AND PIPE COVERING
701.1 STANDARD FOR THERMAL INSULATION, POLYSTYRENE BOARDS
702.1 STANDARD FOR MINERAL FIBRE THERMAL INSULATION FOR BUILDINGS, PART 1: MATERIAL SPECIFICATION
702.2 STANDARD FOR MINERAL FIBRE THERMAL INSULATION FOR BUILDINGS, PART 2: INSTALLATION
703 STANDARD FOR CELLULOSE FIBRE INSULATION FOR BUILDINGS
704.1 STANDARD FOR THERMAL INSULATION, POLYURETHANE AND POLYISOCYANURATE, BOARDS, FACED
705 Standard for Safety for Power Ventilators
706.1 STANDARD FOR WOOD FIBRE INSULATING BOARDS FOR BUILDINGS
710 Standard for Exhaust Hoods for Commercial Cooking Equipment
710.1 STANDARD FOR THERMAL INSULATION - BEAD-APPLIED ONE COMPONENT POLYURETHANE AIR SEALANT FOAM, PART 1: MATERIAL SPECIFICATION
710.2 STANDARD FOR THERMAL INSULATION - BEAD-APPLIED ONE COMPONENT POLYURETHANE AIR SEALANT FOAM, PART 2: INSTALLATION
710A Standard for Rooftop Grease and Oil Collection and Containment Systems
710B Standard for Recirculating Systems
710C Outline of Investigation for Ultraviolet Radiation Systems for Use in the Ventilation Control of Commercial Cooking Operations
711 Rating and Fire Testing of Fire Extinguishers
711.1 STANDARD FOR THERMAL INSULATION - BEAD-APPLIED TWO COMPONENT POLYURETHANE AIR SEALANT FOAM, PART 1: MATERIAL SPECIFICATION
711.2 STANDARD FOR THERMAL INSULATION - BEAD-APPLIED TWO COMPONENT POLYURETHANE AIR SEALANT FOAM, PART 2: INSTALLATION
711A Outline of Investigation for the Fire Test Method for Portable Hand-Held Extinguishers Intended for Use On Residential Cooking Equipment
712.1 STANDARD FOR THERMAL INSULATION - LIGHT DENSITY, OPEN CELL SPRAY APPLIED SEMI-RIGID POLYURETHANE FOAM - MATERIAL SPECIFICATION
712.1 STANDARD FOR THERMAL INSULATION - LIGHT DENSITY, OPEN CELL SPRAY APPLIED SEMI-RIGID POLYURETHANE FOAM - MATERIAL SPECIFICATION
712.2 STANDARD FOR THERMAL INSULATION - LIGHT DENSITY, OPEN CELL SPRAY APPLIED SEMI-RIGID POLYURETHANE FOAM - INSTALLATION
716.1 STANDARD FOR EXTERIOR INSULATION AND FINISH SYSTEMS (EIFS) - MATERIALS AND SYSTEMS
716.2 STANDARD FOR EXTERIOR INSULATION AND FINISH SYSTEMS (EIFS) - INSTALLATION OF EIFS COMPONENTS AND WATER RESISTIVE BARRIER
716.3 STANDARD FOR EXTERIOR INSULATION AND FINISH SYSTEMS (EIFS) - DESIGN APPLICATION
717.1 STANDARD FOR FLAT WALL INSULATING CONCRETE FORM (ICF) UNITS - MATERIAL PROPERTIES
717.1 STANDARD FOR FLAT WALL INSULATING CONCRETE FORM (ICF) UNITS
718 STANDARD FOR SITE QUALITY ASSURANCE PROGRAM FOR SPRAY APPLIED POLYURETHANE FOAM
718 STANDARD FOR SITE QUALITY ASSURANCE PROGRAM FOR SPRAY POLYURETHANE FOAM
719 Standard for Nonmetallic-Sheathed Cables
723 Standard for Test for Surface Burning Characteristics of Building Materials
723S Outline of Investigation for Drop-Out Ceilings Installed Beneath Automatic Sprinklers
724 Outline of Investigation for Indirect Fired, Oil Burning Commercial Cooking Appliances
726 Standard for Oil-Fired Boiler Assemblies
727 Standard for Oil-Fired Central Furnaces
729 Standard for Oil-Fired Floor Furnaces
730 Standard for Oil-Fired Wall Furnaces
731 Standard for Oil-Fired Unit Heaters
732 Standard for Oil-Fired Storage Tank Water Heaters
733 Standard for Oil-Fired Air Heaters and Oil-Fired Direct-Fired Heaters
737 Standard for Fireplace Stoves
745-1 Portable Electric Tools
745-2-31 Particular Requirements for Diamond Core Drills
745-2-32 Particular Requirements for Magnetic Drill Presses
746A Standard for Polymeric Materials - Short Term Property Evaluations
746B Standard for Polymeric Materials - Long Term Property Evaluations
746C Standard for Polymeric Materials - Use in Electrical Equipment Evaluations
746D Standard for Polymeric Materials - Fabricated Parts
746E Standard for Polymeric Materials - Industrial Laminates, Filament Wound Tubing, Vulcanized Fibre, and Materials Used In Printed-Wiring Boards
746F Standard for Polymeric Materials - Flexible Dielectric Film Materials for Use in Printed-Wiring Boards and Flexible Materials Interconnect Constructions
746H Outline of Investigation for Non-Halogenated Materials
746R RESTRICTED USE SUBSTANCES IN POLYMERIC MATERIALS
749 Household Dishwashers
749 Household Dishwashers
749 Household Dishwashers
751 Standard for Vending Machines
752 Standard for Bullet-Resisting Equipment
753 Standard for Alarm Accessories for Automatic Water-Supply Control Valves for Fire-Protection Service
756 Standard for Coin and Currency Changers and Actuators
758 Standard for Appliance Wiring Material
762 Outline of Investigation for Power Roof Ventilators for Restaurant Exhaust Appliances
763 Standard for Motor-Operated Commercial Food Preparing Machines
763 Standard for Motor-Operated Commercial Food Preparing Machines
768 Standard for Combination Locks
770 STANDARD TEST METHOD FOR DETERMINATION OF LONG-TERM THERMAL RESISTANCE OF CLOSED-CELL THERMAL INSULATING FOAMS
771 Night Depositories
771.1 GUIDE FOR PREPARING THERMAL INSULATION STANDARDS, PART 1 - MATERIAL SPECIFICATION
773 Standard for Plug-In Locking Type Photocontrols for Use with Area Lighting
773 STANDARD FOR THERMAL INSULATION TERMINOLOGY
773A Nonindustrial Photoelectric Switches for Lighting Control
774 STANDARD LABORATORY GUIDE FOR THE DETERMINATION OF VOLATILE ORGANIC COMPOUND EMISSIONS FROM POLYURETHANE FOAM
775 Standard for Graphic Arts Equipment
778 Standard for Motor-Operated Water Pumps
779 Standard for Electrically Conductive Floorings
783 Standard for Electric Flashlights and Lanterns for Use in Hazardous (Classified) Locations
789 Standard for Indicator Posts for Fire-Protection Service
790 Standard for Standard Test Methods for Fire Tests of Roof Coverings
791 Standard for Residential Incinerators
793 Standard for Automatically Operated Roof Vents for Smoke and Heat
795 Standard for Commercial-Industrial Gas Heating Equipment
796 Standard for Printed-Wiring Boards
796F Standard for Flexible Materials Interconnect Constructions
797 Electrical Metallic Tubing - Steel
797A Standard for Electrical Metallic Tubing - Aluminum and Stainless Steel
801 STANDARD ON ELECTRIC UTILITY WORKPLACE ELECTRICAL SAFETY FOR GENERATION, TRANSMISSION, AND DISTRIBUTION
810 Standard for Capacitors
810A Standard for Electrochemical Capacitors
810B Standard for DC Power Capacitors
813 Standard for Commercial Audio Equipment
814 Gas-Tube-Sign Cable
817 Standard for Cord Sets and Power-Supply Cords
823 Standard for Electric Heaters For Use in Hazardous (Classified) Locations
826 Standard for Household Electric Clocks
827 Standard for Central-Station Alarm Services
827A Outline of Investigation for Hosted Central Station Services
827B Managed Video Services
834 Standard for Heating, Water Supply, and Power Boilers - Electric
840 Standard for Insulation Coordination Including Clearances and Creepage Distances for Electrical Equipment
842 Standard for Valves for Flammable Fluids
842A Standard for Valves for Gasoline and Gasoline/Ethanol Blends with Nominal Ethanol Concentrations up to 85 Percent (E0 - E85)
842B Standard for Valves for Diesel Fuel, Biodiesel Fuel, Diesel/Biodiesel Blends with Nominal Biodiesel Concentrations up to 20 Percent (B20), Kerosene, and Fuel Oil
844 Standard for Luminaires for Use in Hazardous (Classified) Locations
845 Motor Control Centers
852 Standard for Metallic Sprinkler Pipe for Fire Protection Service
854 Standard for Service-Entrance Cables
857 Busways
858 Standard for Household Electric Ranges
858A Standard for Safety-Related Solid-State Controls for Household Electric Ranges
859 Standard for Household Electric Personal Grooming Appliances
860 Standard for Pipe Unions for Flammable and Combustible Fluids and Fire-Protection Service
863 Standard for Time-Indicating and -Recording Appliances
864 Standard for Control Units and Accessories for Fire Alarm Systems
867 Standard for Electrostatic Air Cleaners
867A Outline of Investigation for Commercial/Industrial Indoor Air Quality Systems, Ozone Generating Type
869A Reference Standard for Service Equipment
870 Standard for Wireways, Auxiliary Gutters, and Associated Fittings
873 Standard for Temperature-Indicating and -Regulating Equipment
875 Standard for Electric Dry-Bath Heaters
879 Standard for Electric Sign Components
879A Standard for LED Sign and Sign Retrofit Kits
879B Outline of Investigation for Polymeric Enclosure Systems for the Splice Between Neon Tubing Electrode Leads and GTO Cable, and the GTO Cable Leading to the Splice
880 Standard for Sustainability for Manufacturing Organizations
884 Standard for Underfloor Raceways and Fittings
887 Standard for Delayed-Action Timelocks
891 Switchboards
891A Outline of Investigation for Switchboards Rated 601 - 1000 V
896 Standard for Oil-Burning Stoves
900 Standard for Air Filter Units
904Z Guidelines for Integrating Health and Safety in the Workplace
906 Outline of Investigation for Solenoids
907 Standard for Fireplace Accessories
907A Outline of Investigation for Factory-Built Termination Caps for Use with Masonry Chimneys
912 Standard for Highway Emergency Signals
913 Standard for Intrinsically Safe Apparatus and Associated Apparatus for Use in Class I, II, III, Division 1, Hazardous (Classified) Locations
913 Standard for Intrinsically Safe Apparatus and Associated Apparatus for Use in Class I, II, III, Division 1, Hazardous (Classified) Locations
916 Standard for Energy Management Equipment
917 Standard for Clock-Operated Switches
921 Commercial Dishwashers
921 Commercial Dishwashers
923 Standard for Microwave Cooking Appliances
924 Standard for Emergency Lighting and Power Equipment
935 Standard for Fluorescent-Lamp Ballasts
943 Ground-Fault Circuit-Interrupters
943B Standard for Appliance Leakage-Current Interrupters
943C Outline of Investigation for Special Purpose Ground-Fault Circuit-Interrupters
959 Standard for Medium Heat Appliance Factory-Built Chimneys
961 Standard for Electric Hobby and Sports Equipment
962 Standard for Household and Commercial Furnishings
962A Standard for Furniture Power Distribution Units
962B Outline of Investigation for Merchandise Display and Rack Mounted Power Distribution Units
963 Standard for Sealing, Wrapping, and Marking Equipment
964 Standard for Electrically Heated Bedding
969 Standard for Marking and Labeling Systems
971 Standard for Nonmetallic Underground Piping For Flammable Liquids
971A Outline of Investigation for Metallic Underground Fuel Pipe
972 Standard for Burglary Resisting Glazing Material
977 Standard for Fused Power-Circuit Devices
979 Standard for Water Treatment Appliances
982 Standard for Motor-Operated Household Food Preparing Machines
982 Standard for Motor-Operated Household Food Preparing Machines
984A Outline of Investigation for Compatibility of Insulating Materials and Refrigerant/Oil for Use in Hermetic Refrigerant Motor-Compressors
985 Standard for Household Fire Warning System Units
987 Standard for Stationary and Fixed Electric Tools
991 Standard for Tests for Safety-Related Controls Employing Solid-State Devices
998 Humidifiers
1001 STANDARD FOR INTEGRATED SYSTEMS TESTING OF FIRE PROTECTION AND LIFE SAFETY SYSTEMS
1004-1 Standard for Rotating Electrical Machines - General Requirements
1004-2 Standard for Impedance Protected Motors
1004-3 Standard for Thermally Protected Motors
1004-4 Standard for Electric Generators
1004-5 Standard for Fire Pump Motors
1004-6 Standard for Servo and Stepper Motors
1004-7 Standard for Electronically Protected Motors
1004-8 Standard for Inverter Duty Motors
1004-9 Standard for Form Wound and Medium Voltage Rotating Electrical Machines
1004-10 Outline of Investigation for Pool Pump Motors
1008 Transfer Switch Equipment
1008A Transfer Switch Equipment, Over 1000 Volts
1008M Transfer Switch Equipment, Meter Mounted
1008S Standard for Solid-State Transfer Switches
1012 Standard for Power Units Other Than Class 2
1017 Vacuum Cleaners, Blower Cleaners, and Household Floor Finishing Machines
1017 Vacuum Cleaners, Blower Cleaners, and Household Floor Finishing Machines
1018 Standard for Electric Aquarium Equipment
1022 Standard for Line Isolation Monitors
1023 Standard for Household Burglar-Alarm System Units
1026 Standard for Household Electric Cooking and Food Serving Appliances
1029 Standard for High-Intensity-Discharge Lamp Ballasts
1029A Outline of Investigation for Ignitors and Related Auxiliaries for HID Lamp Ballasts
1030 Standard for Sheathed Heating Elements
1034 Standard for Burglary-Resistant Electric Locking Mechanisms
1037 Standard for Antitheft Alarms and Devices
1037B Outline of Investigation for Security Latch Devices
1040 Standard for Fire Test of Insulated Wall Construction
1042 Standard for Electric Baseboard Heating Equipment
1046 Standard for Grease Filters for Exhaust Ducts
1047 Standard for Isolated Power Systems Equipment
1053 Standard for Ground-Fault Sensing and Relaying Equipment
1058 Standard for Halogenated Agent Extinguishing System Units
1059 Standard for Terminal Blocks
1062 Standard for Unit Substations
1063 Standard for Machine-Tool Wires and Cables
1066 Standard for Low-Voltage AC and DC Power Circuit Breakers Used in Enclosures
1066A Outline of Investigation for US Naval Commercial Off The Shelf (COTS) Designated Three-Pole Low-Voltage AC Power Circuit Breakers, Drawout-Mounted Type, And Accessories/Functional Components For Use On Non-Nuclear Naval Combatant Ships
1067 Standard for Electrically Conductive Equipment and Materials for Use in Flammable Anesthetizing Locations
1069 Standard for Hospital Signaling and Nurse Call Equipment
1072 Standard for Medium-Voltage Power Cables
1076 Standard for Proprietary Burglar Alarm Units and Systems
1077 Standard for Supplementary Protectors for Use in Electrical Equipment
1077A Outline of Investigation for Automatically Resettable Supplementary Protectors
1081 Standard for Swimming Pool Pumps, Filters, and Chlorinators
1082 Standard for Household Electric Coffee Makers and Brewing-Type Appliances
1083 Household Electric Skillets and Frying-Type Appliances
1086 Standard for Household Trash Compactors
1088 Temporary Lighting Strings
1088 Standard for Temporary Lighting Strings
1090 Standard for Electric Snow Movers
1091 Standard for Butterfly Valves for Fire-Protection Service
1091A Outline of Investigation for Butterfly Valve Indicator Posts for Fire Protection Service
1091B Outline of Investigation for System Control Ball Valves for Fire Protection Service
1097 Double Insulation Systems for Use in Electrical Equipment
1100 Standard for Alcohol and Kerosene Cooking Appliances for Marine Use
1101 Standard for Solidified Fuel Cooking Appliances for Marine Use
1102 Standard for Nonintegral Marine Fuel Tanks
1104 Standard for Marine Navigation Lights
1105 Standard for Marine Use Filters, Strainers, and Separators
1106 Standard for Marine Manually Operated Shutoff Valves for Flammable Liquids
1107 Outline of Investigation for Electric Power Switches
1110 Standard for Marine Combustible Gas Indicators
1112 Standard for Marine Electric Motors and Generators (Cranking, Outdrive Tilt, Trim Tab, Generators, Alternators)
1113 Standard for Electrically Operated Pumps for Nonflammable Liquids, Marine
1120 Standard for Marine Engine Ignition Systems and Components
1121 Standard for Marine Through-Hull Fittings and Sea-Valves
1123 Standard for Marine Buoyant Devices
1128 Standard for Marine Blowers
1129 Standard for Wet Exhaust Components for Marine Engines
1130 Standard for Mechanically and Electrically Operated Fuel Pumps for Marine Use
1136 Outline of Investigation for Marine Rigid and Flexible Air Ducting
1149 Standard for Low Voltage Marine Lighting Fixtures
1168 Standard for Recreational Boats
1175 Standard for Buoyant Cushions
1177 Standard for Buoyant Vests
1180 Standard for Fully Inflatable Recreational Personal Flotation Devices
1191 Standard for Components for Personal Flotation Devices
1193 Standard for Marine Filters and Strainers for Nonflammable Liquids
1196 Standard for Floating Waterlights
1197 Standard for Immersion Suits
1199 Standard for Recreational Boats Less Than 20 Feet in Length
1201 Standard for Sensor Operated Backwater Prevention Systems
1203 Standard for Explosion-Proof and Dust-Ignition-Proof Electrical Equipment for Use in Hazardous (Classified) Locations
1204 Standard for Parts Cleaners
1206 Standard for Electric Commercial Clothes-Washing Equipment
1230 Standard for Amateur Movie Lights
1236 Standard for Battery Chargers for Charging Engine-Starter Batteries
1238 Standard for Control Equipment for Use with Flammable Liquid Dispensing Devices
1238A Outline of Investigation for Battery Operated Hose Nozzle Valve Readers
1240 Standard for Electric Commercial Clothes-Drying Equipment
1241 Standard for Junction Boxes for Swimming Pool Luminaires
1242 Standard for Electrical Intermediate Metal Conduit - Steel
1247 Standard for Diesel Engines for Driving Stationary Fire Pumps
1247A OUTLINE OF INVESTIGATION FOR VARIABLE SPEED LIMITING CONTROLS INSTALLED WITH DIESEL ENGINES FOR DRIVING STATIONARY FIRE PUMPS
1248 Standard for Engine-Generator Assemblies for Use in Recreational Vehicles
1254 Standard for Pre-Engineered Dry and Wet Chemical Extinguishing System Units
1254E Outline of Investigation for Dry Chemical Extinguishing System Units, Engineered Type
1254F Outline of Investigation for Rubber-Gasketed Fittings and Metallic Pipe for Commercial Cooking Equipment Protection Extinguishing System Units
1254H Outline of Investigation for Stationary and Semi-Portable Hand Hose Line Dry Chemical Extinguishing System Units
1256 Standard for Fire Test of Roof Deck Constructions
1261 Standard for Electric Water Heaters for Pools and Tubs
1263 Outline of Investigation for Irrigation Cables
1275 Standard for Flammable Liquid Storage Cabinets
1276 Outline of Investigation for Welding Cable
1277 Standard for Electrical Power and Control Tray Cables with Optional Optical-Fiber Members
1278 Standard for Movable and Wall- or Ceiling-Hung Electric Room Heaters
1279 Outline of Investigation for Solar Collectors
1283 Standard for Electromagnetic Interference Filters
1285 Standard for Pipe and Couplings, Polyvinyl Chloride (PVC), and Oriented Polyvinyl Chloride (PVCO) for Underground Fire Service
1286 Standard for Office Furnishings
1294 Outline of Investigation for Composite Panels
1296 Standard for Shear Resistance Tests for Ceiling Boards for Manufactured Homes
1298 Standard for Roof Trusses for Manufactured Homes
1309 Standard for Marine Shipboard Cable
1310 Standard for Class 2 Power Units
1313 Standard for Nonmetallic Safety Cans for Petroleum Products
1314 Standard for Special-Purpose Metal Containers
1315 Standard for Metal Waste Paper Containers
1316 Standard for Fibre Reinforced Underground Tanks for Flammable and Combustible Liquids
1321 Outline of Investigation for Polytetrafluoroethylene Plastic Seal Materials
1322 Standard for Fabricated Scaffold Planks and Stages
1323 Standard for Scaffold Hoists
1331 Standard for Station Inlets and Outlets
1332 Standard for Organic Coatings for Steel Enclosures for Outdoor Use Electrical Equipment
1336 Outline of Investigation for Exit Doors
1337 Outline of Investigation for LP-Gas, Natural Gas, and Manufactured Gas Devices for Engine Fuel Systems
1340 Standard for Hoists
1349 Outline of Investigation for LP-Gas Vaporizers
1349 GUIDE FOR THE INVESTIGATION OF LP-GAS VAPORIZERS
1351 Outline of Investigation for Hose Reels
1356 Outline of Investigation for Pipe Joint Sealing Compounds
1357 Outline of Investigation for Oxygen-Fuel Gas Flash Arrester and Combination Flash Arrester and Back-Pressure Check Valves
1358 Outline of Investigation for Compressed Gas Check Valves and Hose Couplers
1362 Outline of Investigation for Gas Boosters
1363 Standard for Relocatable Power Taps
1363A Outline of Investigation for Special Purpose Relocatable Power Taps
1365 Outline of Investigation for Corrugated Medical Tubing (CMT) Systems
1366 Outline of Investigation for Insulated Bus Pipe
1368 Outline of Investigation for Restricted Use Substances in Metallic Components
1369 Standard for Aboveground Piping for Flammable and Combustible Liquids
1370 Standard for Unvented Alcohol Fuel Burning Decorative Appliances
1371 Outline of Investigation for Pump Cable Submersed in Diesel Exhaust Fluid (DEF)
1374 Outline of Investigation for Fire Tests of Balcony Assemblies
1377 Outline of Investigation for Wire Used in Low Voltage Seasonal Lighting Products In Circuits With a Maximum Available Power of 15W
1381 Outline of Investigation for Aerosol Duct Sealant
1382 Outline of Investigation for Sheet Metal Air Ducts with Sealed Joints
1384 Standard for Water-Based Automatic Extinguisher Units
1385 Outline of Investigation for Cryogenic Submersible Pump Cable
1389 Standard for Plant Oil Extraction Equipment for Installation and Use in Ordinary (Unclassified) Locations and Hazardous (Classified) Locations
1411 Standard for Transformers and Motor Transformers for Use in Audio-, Radio-, and Television-Type Appliances
1412 Standard for Fusing Resistors and Temperature-Limited Resistors for Radio- and Television- Type Appliances
1413 Standard for High-Voltage Components for Television-Type Appliances
1416 Standard for Overcurrent and Overtemperature Protectors for Radio- and Television- Type Appliances
1417 Standard for Special Fuses for Radio- and Television- Type Appliances
1419 Standard for Professional Video and Audio Equipment
1424 Standard for Cables for Power-Limited Fire-Alarm Circuits
1425 Standard for Cables for Non-Power-Limited Fire-Alarm Circuits
1426 Standard for Electrical Cables for Boats
1429 Standard for Pullout Switches
1431 Standard for Personal Hygiene and Health Care Appliances
1434 Standard for Thermistor-Type Devices
1436 Standard for Outlet Circuit Testers and Similar Indicating Devices
1437 Standard for Electrical Analog Instruments - Panel Board Types
1439 Standard for Tests for Sharpness of Edges on Equipment
1441 Coated electrical sleeving
1446 Standard for Systems of Insulating Materials - General
1446 Standard for Systems of Insulating Materials - General
1446A Outline of Investigation for Dry Type Transformer Insulation Systems Rated Above 600V
1446A Outline of Investigation for Dry Type Transformer Insulation Systems Rated Above 1 kV
1447 Standard for Electric Lawn Mowers
1449 Standard for Surge Protective Devices
1449A Outline of Investigation for Electric Vehicle (EV) Surge Protective Devices
1450 Standard for Motor-Operated Air Compressors, Vacuum Pumps, and Painting Equipment
1453 Standard for Electric Booster and Commercial Storage Tank Water Heaters
1462 Outline of Investigation for Mobile Home Pipe Heating Cable
1468 Standard for Direct Acting Pressure Reducing and Pressure Restricting Valves
1469 Standard for Strength of Body and Hydraulic Pressure Loss Testing of Backflow Special Check Valves
1472 Solid-State Dimming Controls
1474 Standard for Adjustable Drop Nipples for Sprinkler Systems
1477 Outline of Investigation for Compressed Gas Shutoff Valves
1478 Standard for Fire Pump Relief Valves
1478A Standard for Pressure Relief Valves for Sprinkler Systems
1479 Standard for Fire Tests of Penetration Firestops
1480 Speakers for Fire Alarm and Signaling Systems, Including Accessories
1480A Standard for Speakers for Commercial and Professional Use
1481 Standard for Power Supplies for Fire-Protective Signaling Systems
1482 Standard for Solid-Fuel Type Room Heaters
1484 Standard for Residential Gas Detectors
1486 Standard for Quick Opening Devices for Dry Pipe Valves for Fire Protection Service
1488 Outline of Investigation for Seasonal Use Modular Trees
1489 Standard for Fire Tests of Fire Resistant Pipe Protection Systems Carrying Combustible Liquids
1492 Audio-Video Products and Accessories
1493 Outline of Investigation for Underground Low-Energy Circuit Cable
1500 Standard for Ignition-Protection Test for Marine Products
1517 Standard for Hybrid Personal Flotation Devices
1551 Outline of Investigation for Sprinkler Systems Wire
1557 Standard for Electrically Isolated Semiconductor Devices
1558 Standard for Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear
1559 Standard for Insect-Control Equipment - Electrocution Type
1561 Standard for Dry-Type General Purpose and Power Transformers
1562 Standard for Transformers, Distribution, Dry-Type - Over 600 Volts
1563 Standard for Electric Spas, Equipment Assemblies, and Associated Equipment
1564 Standard for Industrial Battery Chargers
1565 Positioning Devices
1567 Standard for Receptacles and Switches Intended for Use with Aluminum Wire
1569 Metal-Clad Cables
1573 Standard for Stage and Studio Luminaires and Connector Strips
1574 Standard for Track Lighting Systems
1576 Standard for Flashlights and Lanterns
1577 Standard for Optical Isolators
1581 Reference Standard for Electrical Wires, Cables, and Flexible Cords
1588 Outline of Investigation for Roof and Gutter De-Icing Cable Units
1594 Standard for Sewing and Cutting Machines
1598 Luminaires
1598A Standard for Supplemental Requirements for Luminaires for Installation on Marine Vessels
1598B Standard for Supplemental Requirements for Luminaire Reflector Kits for Installation on Previously Installed Fluorescent Luminaires
1598C Standard for Light-Emitting Diode (LED) Retrofit Luminaire Conversion Kits
1602 Standard for Gasoline-Engine-Powered, Rigid-Cutting-Member Edgers and Edger-Trimmers
1610 Standard for Central-Station Burglar-Alarm Units
1618 Standard for Wall Protectors, Floor Protectors, and Hearth Extensions
1626 Standard for Residential Sprinklers for Fire-Protection Service
1630 Outline of Investigation for Residential Hose Cabinets
1635 Standard for Digital Alarm Communicator System Units
1637 Standard for Home Health Care Signaling Equipment
1638 Visible Signaling Devices for Fire Alarm and Signaling Systems, Including Accessories
1638A Standard for Visual Signal Appliances for General Signaling Use
1640 Standard for Portable Power-Distribution Equipment
1641 Standard for Installation and Classification of Residential Burglar Alarm Systems
1642 Standard for Lithium Batteries
1647 Standard for Motor-Operated Massage and Exercise Machines
1650 Standard for Portable Power Cable
1651 Standard for Optical Fiber Cable
1652 Outline of Investigation for Flexible Metallic Tubing
1653 Electrical Nonmetallic Tubing
1655 Standard for Community-Antenna Television Cables
1659 Standard for Attachment Plug Blades for Use in Cord Sets and Power-Supply Cords
1660 Liquid-Tight Flexible Nonmetallic Conduit
1666 Standard for Test for Flame Propagation Height of Electrical and Optical-Fiber Cables Installed Vertically in Shafts
1673 Standard for Electric Space Heating Cables
1676 Standard for Conductive-Path and Discharge-Path Resistors for Use in Radio-, Video-, or Television-Type Appliances
1678 Standard for Household, Commercial, and Institutional-Use Carts, Stands and Entertainment Centers for Use with Audio and/or Video Equipment
1680 Outline of Investigation for Stage and Lighting Cables
1681 Standard for Wiring Device Configurations
1682 Plugs, Receptacles, and Cable Connectors of the Pin and Sleeve Type
1683 Outline of Investigation for Electric Heating Products For Installation Under Floor Coverings
1685 Standard for Vertical-Tray Fire-Propagation and Smoke-Release Test for Electrical and Optical-Fiber Cables
1686 Standard for Pin and Sleeve Configurations
1690 Standard for Data-Processing Cable
1691 Single Pole Locking-Type Separable Connectors
1692 Standard for Polymeric Materials - Coil Forms
1693 Standard for Electric Radiant Heating Panels and Heating Panel Sets
1694 Standard for Tests for Flammability of Small Polymeric Component Materials
1696 Mechanical Protection Tubing (MPT) and Fittings
1699 Standard for Arc-Fault Circuit-Interrupters
1699A Outline of Investigation for Outlet Branch Circuit Arc-Fault Circuit-Interrupters
1699B Standard for Photovoltaic (PV) DC Arc-Fault Circuit Protection
1703 Standard for Flat-Plate Photovoltaic Modules and Panels
1703 FLAT-PLATE PHOTOVOLTAIC MODULES AND PANELS
1703 FLAT-PLATE PHOTOVOLTAIC MODULES AND PANELS
1709 Standard for Rapid Rise Fire Tests of Protection Materials for Structural Steel
1711 Standard for Amplifiers for Fire Protective Signaling Systems
1712 Outline of Investigation for Tests for Ampacity of Insulated Electrical Conductors Installed in the Fire Protective System
1713 Standard for Pressure Pipe and Couplings, Glass Fiber-Reinforced, for Underground Fire Service
1715 Standard for Fire Test of Interior Finish Material
1724 Outline of Investigation for Fire Tests for Electrical Circuit Protective Systems
1726 Standard for Automatic Drain Valves for Standpipe Systems
1727 Standard for Commercial Electric Personal Grooming Appliances
1730 Standard for Smoke Detector Monitors and Accessories for Individual Living Units of Multifamily Residences and Hotel/Motel Rooms
1738 Standard for Venting Systems for Gas-Burning Appliances, Categories II, III, and IV
1739 Standard for Pilot-Operated Pressure-Control Valves for Fire-Protection Service
1740 Standard for Robots and Robotic Equipment
1741 Standard for Inverters, Converters, Controllers and Interconnection System Equipment for Use With Distributed Energy Resources
1746 Standard for External Corrosion Protection Systems For Steel Underground Storage Tanks
1767 Standard for Early-Suppression Fast-Response Sprinklers
1767B Specific Application Early- Suppression Fast-Response (ESFR) Pendent Sprinklers Having A Nominal Discharge Coefficient Of 28.0
1769 Standard for Cylinder Valves
1773 Standard for Termination Boxes
1776 Standard for High-Pressure Cleaning Machines
1777 Standard for Chimney Liners
1778 Uninterruptible Power Systems
1778 Standard for Uninterruptible Power Supply Equipment
1783 Outline of Investigation for Direct Connect Systems for Solid Fuel Burning Appliances
1784 Standard for Air Leakage Tests of Door Assemblies and Other Opening Protectives
1786 Direct Plug-In Nightlights
1795 Standard for Hydromassage Bathtubs
1801 Outline of Investigation for Power Distribution Centers for Communications Equipment
1803 Standard for Factory Follow-Up on Third Party Certified Portable Fire Extinguishers
1805 Standard for Laboratory Hoods and Cabinets
1807 Outline of Investigation for Fire-Resistant Cable Coating Materials
1812 Standard for Ducted Heat Recovery Ventilators
1815 Standard for Nonducted Heat Recovery Ventilators
1820 Standard for Fire Test of Pneumatic Tubing for Flame and Smoke Characteristics
1821 Standard for Thermoplastic Sprinkler Pipe and Fittings for Fire Protection Service
1821A Outline of Investigation for Thermoplastic Sprinkler Pipe and Fittings for Low Pressure Dry Pipe Applications
1836 Outline of Investigation for Electric Motors and Generators for Use in Class I, Division 2, Class I, Zone 2, Class II, Division 2 and Zone 22 Hazardous (Classified) Locations
1836 Outline of Investigation for Electric Motors and Generators for Use in Class I, Division 2 and Class II, Division 2 Hazardous (Classified) Locations
1838 Standard for Low Voltage Landscape Lighting Systems
1839 Standard for Automotive Battery Booster Cables
1854 Outline of Investigation for Excavation Liners for Secondary Containment of Flammable and Combustible Liquids
1856 Outline of Investigation for Underground Fuel Tank Internal Retrofit Systems
1861 Outline of Investigation for Power-Operated Chemical Pumps
1863 Standard for Communications-Circuit Accessories
1876 Standard for Isolating Signal and Feedback Transformers for Use in Electronic Equipment
1887 Standard for Fire Test of Plastic Sprinkler Pipe for Visible Flame and Smoke Characteristics
1889 Standard for Commercial Filters for Cooking Oil
1897 Standard for Uplift Tests for Roof Covering Systems
1917 Standard for Solid-State Fan Speed Controls
1951 Standard for Electric Plumbing Accessories
1953 Outline of Investigation for Power Distribution Blocks
1963 Standard for Refrigerant Recovery/Recycling Equipment
1964 Outline of Investigation for Rescue Equipment
1971 Standard for Signaling Devices for the Hearing Impaired
1973 Standard for Batteries for Use in Stationary, Vehicle Auxiliary Power and Light Electric Rail (LER) Applications
1974 Standard for Evaluation for Repurposing Batteries
1975 Standard for Fire Tests for Foamed Plastics Used for Decorative Purposes
1976 Outline of Investigation for Crimp Tools for use with Connecting Devices
1977 Standard for Component Connectors for Use in Data, Signal, Control and Power Applications
1978 Standard for Grease Ducts
1981 Standard for Central-Station Automation Systems
1989 Standard for Standby Batteries
1990 Standard for Nonmetallic Underground Conduit with Conductors
1993 Self-Ballasted Lamps and Lamp Adapters
1994 Standard for Luminous Egress Path Marking Systems
1995 Heating and Cooling Equipment
1996 Standard for Electric Duct Heaters
1998 Standard for Software in Programmable Components
2003 Outline of Investigation for LP-Gas Cylinder Assemblies
2006 Standard for Halon 1211 Recovery/Recharge Equipment
2007A Shatter Containment Of Lamps For Use In Regulated Food Establishments
2007B Outline of Investigation for Hygenic Design and Construction of Residential Food Heating and Cooking Appliances
2011 Outline of Investigation for Machinery
2017 Standard for General-Purpose Signaling Devices and Systems
2021 Standard for Fixed and Location-Dedicated Electric Room Heaters
2024 Standard for Cable Routing Assemblies and Communications Raceways
2024 STANDARD METHOD OF FIRE TESTS FOR OPTICAL FIBRE CABLE RACEWAY
2029 Outline of Investigation for Gas/Vapor-Blocked Cable Classified for Use in Class I Hazardous (Classified) Locations
2034 Standard for Single and Multiple Station Carbon Monoxide Alarms
2039 Flexbile Connector Piping for Fuels
2040 Standard for Folding Rollaway Tables
2043 Standard for Fire Test for Heat and Visible Smoke Release for Discrete Products and Their Accessories Installed in Air-Handling Spaces
2044 Standard for Commercial Closed-Circuit Television Equipment
2049 Outline of Investigation for Residential Pipe Heating Cable
2050 Standard for National Industrial Security Systems
2054 Standard for Household and Commercial Batteries
2056 Outline of Investigation for Safety of Power Banks
2058 Outline of Investigation for High-Security Electronic Locks
2061 Standard for Adapters and Cylinder Connection Devices for Portable LP-Gas Cylinder Assemblies
2062 Outline of Investigation for Enclosures for Use in Hazardous (Classified) Locations
2069 Outline of Investigation for Battery Holders
2075 Standard for Gas and Vapor Detectors and Sensors
2075A Outline of Investigation for CO Gas Test Kit for Gas and Vapor Detectors and Sensors
2079 Standard for Tests for Fire Resistance of Building Joint Systems
2080 Standard for Fire Resistant Tanks for Flammable and Combustible Liquids
2085 Standard for Protected Aboveground Tanks for Flammable and Combustible Liquids
2089 Standard for Vehicle Battery Adapters
2096 Standard for Commercial/Industrial Gas and/or Oil-Burning Assemblies With Emission Reduction Equipment
2097 Reference Standard for Double Insulation Systems for Use in Electronic Equipment
2106 Standard for Field Erected Boiler Assemblies
2108 Standard for Low Voltage Lighting Systems
2111 Standard for Overheating Protection for Motors
2112 Outline of Investigation for Venting Systems for Use with Gas-Fired Direct Vent Appliances
2115 Standard for Processed Solid-Fuel Firelogs and Firestarters
2119 Outline of Investigation for Protective Shielding Guards for Plumbing
2127 Standard for Inert Gas Clean Agent Extinguishing System Units
2129 Halocarbon Clean Agent Fire Extinguishers
2133 Outline of Investigation for Compressed Gas Cylinder Safety Caps
2152 Outline of Investigation for Special Purpose Nonmetallic Containers and Tanks for Specific Combustible or Noncombustible Liquids
2156 Outline of Investigation for Rubber Hose for Radiant Heating
2157 Electric Clothes Washing Machines and Extractors
2157 Electric Clothes Washing Machines and Extractors
2158 Electric Clothes Dryers
2158 Electric Clothes Dryers
2158A Standard for Clothes Dryer Transition Duct
2161 Standard for Neon Transformers and Power Supplies
2162 Standard for Commercial Wood-Fired Baking Ovens - Refractory Type
2162 COMMERCIAL WOOD-FIRED BAKING OVENS - REFRACTORY TYPE
2166 Standard for Halocarbon Clean Agent Extinguishing System Units
2166P Outline of Investigation for Plastic Pipe and Fitting Assemblies used as Self-Contained Automatic Extinguisher Units for Total Flooding Applications
2167 Standard for Water Mist Nozzles for Fire Protection Service
2178 Outline of Investigation for Marking and Coding Equipment
2182 Standard for Refrigerants
2191 Outline of Investigation for Commercial Butane-Fueled Portable Cook Stoves
2196 Standard for Fire Test for Circuit Integrity of Fire-Resistive Power, Instrumentation, Control, and Data Cables
2200 Standard for Stationary Engine Generator Assemblies
2200A Outline of Investigation for Fire Containment Testing of Stationary Engine Generator Enclosures
2201 Standard for Carbon Monoxide (CO) Emission Rate of Portable Generators
2202 Standard for Electric Vehicle (EV) Charging System Equipment
2208 Standard for Solvent Distillation Units
2215 Outline of Investigation for Oil/Water Separators
2215 Outline of Investigation for Oil/Water Separators
2218 Standard for Impact Resistance of Prepared Roof Covering Materials
2218A Standard for Impact Resistance of Roofing Systems
2221 Standard for Tests of Fire Resistive Grease Duct Enclosure Assemblies
2225 Standard for Cables and Cable-Fittings For Use In Hazardous (Classified) Locations
2227 Standard for Overfilling Prevention Devices
Jan-31 Standard for Safety for Personnel Protection Systems for Electric Vehicle (EV) Supply Circuits: General Requirements
Feb-31 Standard for Safety for Personnel Protection Systems for Electric Vehicle (EV) Supply Circuits: Particular Requirements for Protection Devices for Use in Charging Systems
2237 Standard for Multi-Point Interconnection Power Cable Assemblies for Industrial Machinery
2238 Standard for Cable Assemblies and Fittings for Industrial Control and Signal Distribution
2239 Hardware for the Support of Conduit, Tubing, and Cable
2245 Standard for Below-Grade Vaults for Flammable Liquid Storage Tanks
2249 Outline of Investigation for Hydrogen Fuel Dispensing Systems
2250 Standard for Instrumentation Tray Cable
2251 Standard for Plugs, Receptacles, and Couplers for Electric Vehicles
2255 Standard for Receptacle Closures
2256 Outline of Investigation for Nonmetallic Sheathed Cable Interconnects
2257 Outline of Investigation for Identification Tests for Jacket and Insulation Materials Used in Plenum Cables
2258 Standard for Aboveground Nonmetallic Tanks for Fuel Oil and Other Combustible Liquids
2258 Standard for Aboveground Nonmetallic Tanks for Fuel Oil and Other Combustible Liquids
2261 Outline of Investigation for Cables For Network-Powered Broadband Communications Systems
2262 Outline of Investigation for Fuel Cell Modules for Use in Portable and Stationary Equipment
2262A Outline of Investigation for Borohydride Fuel Cartridges with Integral Fuel Processing for Use with Portable Fuel Cell Power Systems or Similar Equipment
2264B Outline of Investigation for Hydrogen Generators Using Water Reaction
2264D Outline of Investigation for Portable Water Electrolysis Type Hydrogen Generators
2265A Outline of Investigation for Micro Fuel Cell Power Systems Using Direct Methanol Fuel Cell Technology
2265C Outline of Investigation for Hand-Held or Hand-Transportable Alkaline (Direct Borohydride) Fuel Cell Power Units And Borohydride Fuel Cartridges For Use With Consumer Electronics or Information Technology Equipment
2267 Standard for Fuel Cell Power Systems for Installation in Industrial Electric Trucks
2269 Outline of Investigation for Optical Fiber/Communications/Signaling/Coaxial Cable Outlet Boxes
2271 Standard for Batteries for Use In Light Electric Vehicle (LEV) Applications
2272 Standard for Electrical Systems for Personal E-Mobility Devices
2273 Outline of Investigation for Festoon Cable
2276 Outline of Investigation for Recreational Vehicle Cable
2277 FLEXIBLE MOTOR SUPPLY CABLE AND WIND TURBINE TRAY CABLE
2277 Outline of Investigation for Flexible Motor Supply Cable and Wind Turbine Tray Cable
2282 Environmental Claim Validation Procedure (ECVP) for Resistance to Bacterial Growth
2283 Environmental Claim Validation Procedure (ECVP) for Resistance to Fungal Growth
2305 Standard for Exhibition Display Units, Fabrication and Installation
2321 Outline of Investigation for Plate Warmers
2329 Outline of Investigation for Personnel Electrostatic Control Devices
2333 Standard for Infrared Thermometers
2335 Standard for Fire Tests of Storage Pallets
2339 Outline of Investigation for Mobile and Modular Stages
2344 Standard for Material Lifts
2351 Standard for Spray Nozzles for Fire-Protection Service
2351A Outline of Investigation for Nozzle Adaptors with Integral Filter for Fire Protection Service
2353 Standard for Safety for Single- and Multi-Layer Insulated Winding Wire
2358 Outline of Investigation for Fire Tests of Pre-Lit Artificial Seasonal Use Trees and Other Seasonal Decorative Items
2360 Standard for Test Methods for Determining the Combustibility Characteristics of Plastics Used in Semi-Conductor Tool Construction
2361 Outline of Investigation for Custom-Built Kiosks
2365 Outline of Investigation for Laundry Equipment Accessories
2367 Standard for Solid State Overcurrent Protectors
2368 Standard for Fire Exposure Testing of Rigid Nonmetallic and Composite Nonmetallic Intermediate Bulk Containers for Combustible Liquids
2375 Hip And Ridge Shingles
2388 Standard for Flexible Lighting Products
2389 Outline of Investigation for Coaxial Fault Protectors for Network-Powered Broadband Communications Systems
2391 Outline of Investigation for Equipment with Remote Feeding Telecommunication Circuits Intended for Backwards Compatibility in Legacy Telecommunication Equipment
2395 Standard for Adhesives for Use in Heating and Cooling Appliances to Secure Thermal Insulation
2399 Outline of Investigation for Metal Venting Systems for Household Clothes Dryers
2416 Standard for Audio/Video, Information and Communication Technology Equipment Cabinet, Enclosure and Rack Systems
2419 Outline of Investigation for Electrically Conductive Corrosion Resistant Compounds
2420 Belowground Reinforced Thermosetting Resin Conduit (RTRC) and Fittings
2422 Outline of Investigation for Ultroviolet Curing Equipment for Commercial Use
2424 Outline of Investigation for Cable Marked 'Limited Combustible'
2431 Standard for Safety for Durability of Fire Resistive Coatings and Materials
2432 Outline of Investigation for Dry System Water Delivery Time Calculation Programs
2436 Outline of Investigation for Spill Containment for Stationary Lead Acid Battery Systems
2438 Standard for Outdoor Seasonal-Use Cord-Connected Wiring Devices
2441 Outline of Investigation for Component - Connector Housings
2442 Standard for Wall- and Ceiling-Mounts and Accessories
2443 Standard for Flexible Sprinkler Hose with Fittings for Fire Protection Service
2446 Outline of Investigation for Unitary Boiler Room Systems
2447 Outline of Investigation for Containment Sumps, Fittings and Accessories for Fuels
2452 Outline of Investigation for Electric Swimming Pool and Spa Cover Operators
2459 Insulated Multi-Pole Splicing Wire Connectors
2460 Standard for Nonshielded Cable
2485 Environmental Claim Validation Procedure (ECVP) for Recyclability of Paper-Based Products
2505 Outline of Investigation for Cementitious Materials Used For Resurfacing Smoke Chamber Of Masonry Fireplaces
2506 Outline of Investigation for Refractory Panels For Masonry Fireplaces
2515 Aboveground Reinforced Thermosetting Resin Conduit (RTRC) and Fittings
2515A Standard for Supplemental Requirements for Extra Heavy Wall Reinforced Thermosetting Resin Conduit (RTRC) and Fittings
2518 Standard for Air Dispersion Systems
2523 Standard for Solid Fuel-Fired Hydronic Heating Appliances, Water Heaters, And Boilers
2524 Standard for In-building 2-Way Emergency Radio Communication Enhancement Systems
2524A Outline of Investigation for In-Building Auxiliary Radio Communication Systems
2525 Outline of Investigation for Rescue Assistance Two- Way Emergency Communication Systems for Stairwell and Elevator Landing/Lobby Areas of Refuge
2556 Wire and Cable Test Methods
2557 Outline of Investigation for Membrane Switches
2560 Standard for Emergency Call Systems for Assisted Living and Independent Living Facilities
2561 Standard for 1400 Degree Fahrenheit Factory-Built Chimneys
2562 Outline of Investigation for Pendant Cable
2562 Outline of Investigation for Pendant Cable
2563 Outline of Investigation for Heat Resistant Wire
2564 Outline of Investigation for Low-Voltage Surge Withstand Telecommunications Overcurrent Protector Components
2565 Standard for Industrial Metalworking and Woodworking Machine Tools
2566 Outline of Investigation for Part 2: Low-Voltage Surge Withstand Telecommunications Fuses
2567 Outline of Investigation for Part 3: Low-Voltage Surge Withstand Telecommunications Polymer Positive Temperature Coefficient Thermistor (PPTC)
2569 Outline of Investigation for Part 5: Low-Voltage Surge Withstand Telecommunications Line Feed Resistor (LFR)
2570 Outline of Investigation for Part 6: Low-Voltage Surge Withstand Telecommunications Electronic Current Limiters (ECL)
2571 Outline of Investigation for Irrigation Feeder, Control, and Signal Cables
2572 Standard for Mass Notification Systems
2573 Outline of Investigation for Automatic Air Release, Air/Vacuum and Combination Air Valves for Fire Protection Service
2576 Outline of Investigation for Refractory Combustion Chamber Liners
2577 Suspended Ceiling Power Grid Systems and Equipment
2577 Standard for Suspended Ceiling Power Grid Systems and Equipment
2579 Outline of Investigation for Low-Voltage Fuses - Fuses for Photovoltaic Systems
2580 Batteries for Use In Electric Vehicles
2580 STANDARD ON BATTERIES FOR USE IN ELECTRIC VEHICLES
2581 Outline of Investigation for Hydraulic Surge Suppressors for Water Based Fire Protection Systems
2581A Outline of Investigation for Expansion Chambers for Water Based Fire Protection Systems
2582 Outline of Investigation for Hip and Ridge Vents
2583 Outline of Investigation for Fuel Tank Accessories
2585 Outline of Investigation for Rebuilt Flammable Liquid Meters
2586 Standard for Hose Nozzle Valves
2586A Standard for Hose Nozzle Valves for Gasoline and Gasoline/Ethanol Blends with Nominal Ethanol Concentrations up to 85 Percent (E0 - E85)
2586B Standard for Hose Nozzle Valves for Diesel Fuel, Biodiesel Fuel, Diesel/Biodiesel Blends with Nominal Biodiesel Concentrations up to 20 Percent (B20), Kerosene, and Fuel Oil
2586C Outline of Investigation for Hose Nozzle Valves for Diesel Exhaust Fluid
2591 Outline of Investigation for Battery Cell Separators
2592 Standard for Low Voltage LED Wire
2593 Outline of Investigation for Motor Driven Turnstile Operators and Systems
2594 Standard for Electric Vehicle Supply Equipment
2595 General Requirements for Battery-Powered Appliances
2600 Standard for Relocatable Structures
2600 Standard for Relocatable Structures
2610 Standard for Commercial Premises Security Alarm Units and Systems
2640 Test Method for Server Performance
2682 Outline of Investigation for Switch-Rated Plugs and Receptacles
2695 Outline of Investigation for DC Rated Attachment Plugs and Outlet Devices Intended for Use with Information Technology and Telecommunication Equipment Installed in Restricted Access Locations
2703 Standard for Mounting Systems, Mounting Devices, Clamping/Retention Devices, and Ground Lugs for Use with Flat-Plate Photovoltaic Modules and Panels
2710 Outline of Investigation for Sustainability for Portable Electronic Products
2726 Outline of Investigation for Battery Lead Wire
2727 Outline of Investigation for Retrofit Motor Control Center Units For Use With Specified Motor Control Center Sections
2728 PELLET FUEL BURNING COOKING APPLIANCES
2728 PELLET FUEL BURNING COOKING APPLIANCES
2728A Outline of Investigation for Pellet Fuel Burning Cooking Appliances
2731 Outline of Investigation for Telecommunication Central Office Power, Battery, and Distribution Cables
2733 Outline of Investigation for Surface Vehicle On-Board Cable
2734 Outline for Connectors and Service Plugs for Use with On-Board Electrical Vehicle (EV) Charging Systems
2735 Standard for Electric Utility Meters
2736 Outline of Investigation for Single Pole Separable Interconnecting Cable Connectors for Use with Wind Turbine Generating Systems
2738 Standard for Induction Power Transmitters and Receivers for use with Low Energy Products
2743 Standard for Portable Power Packs
2745 Outline of Investigation for Meter Socket Adapters for Communications Equipment
2747 Outline of Investigation for Electric Vehicle Power Supplies
2748 Standard for Arcing Fault Quenching Equipment
2748A Standard for Arcing Fault Interrupting Devices
2749 Outline Of Investigation for Seasonal Use LED Drivers and Non-Integral LED Lighting Strings
2752 Outline of Investigation for Fabricated Stairways
2753 Outline of Investigation for Battery Operated Ride-On Lawn Mowers
2755 Outline of Investigation for Modular Data Centers
2759 Standard for Sustainability for Hard Surface Cleaners
2761 Sealants and Caulking Compounds
2762 Adhesives
2763 Sustainability for Energy Efficient Harmonic Cancellation Transformers
2766 Standard for Sustainability for Energy Efficient Heating/Cooling Systems for Building
2767 Paint and Varnish Remover
2769 Corrosion Control Products
2770 Commercial Car Wash
2771 Paper Products
2773 Pens, Mechanical Pencils, and Other Writing Instruments
2775 Standard for Fixed Condensed Aerosol Extinguishing System Units
2775 FIXED CONDENSED AEROSOL EXTINGUISHING SYSTEM UNITS
2776 Laundry Detergents and Fabric Softeners
2777 Standard for Sustainability for Hard Floor Care Products
2778 Products Made From Recycled Plastic
2780 Urinal Blocks
2781 Pool and Spa Water Treatment Products
2783 Instant Hand Antiseptic Products
2784 Standard for Sustainability for Hand Cleaners
2789 Environmental Claim Validation Procedure for Calculation of Estimated Recyclability Rate
2790 Standard for Commercial Incinerators
2791 Standard for Sustainability for Drain and/or Grease Trap Additives: Biologically-based
2792 Standard for Sustainability for Cleaning and Degreasing Compounds: Biologically-based
2794 Standard for Sustainability for Disinfectants and Disinfectant Cleaners
2795 Standard for Sustainability for Carpet and Upholstery Care Products
2796 Standard for Sustainability for Odor Control Products
2797 Standard for Sustainability for RV and/or Marine Holding Tank Additives: Biologically-based
2798 Standard for Sustainability for Biological Digestion Additives for Cleaning and Odour Control
2799 Zero Waste to Landfill
2799 Environmental Claim Validation Procedure for Zero Waste to Landfill
2799A Environmental Claim Validation Procedure (ECVP) for Zero Waste Classifications
Jan-00 Standard for Medical Device Interoperability
2801 Standard for Sustainability for Printing Inks
2802 Standard for Performance Testing of Camera Image Quality
2803 Standard for Sustainability for Printing Services
2804 Environmental Claim Validation Procedure for Energy Savings Associated with the Use of a Plastic Additive
2805 Standard for Sustainability for Compostable Paper Bags
2806 Outline of Investigation for Heavy Duty Flexible Power Cable
2807 Environmental Claim Validation Procedure for PVC Free Products
2808 Outline of Investigation for Energy Monitoring Current Transformers
2808 Outline of Investigation for Energy Monitoring Current Transformers
2809 Environmental Claim Validation Procedure (ECVP) for Recycled Content
2818 GREENGUARD Certification Program For Chemical Emissions For Building Materials, Finishes And Furnishings
2819 GREENGUARD Certification Program for Chemical and Particle Emissions for Electronic Equipment
2820 GREENGUARD Certification Program for Chemical Emissions for Cleaners and Cleaning Maintenance Systems
2821 UL GREENGUARD Certification Program Method for Measuring and Evaluating Chemical Emissions From Building Materials, Finishes and Furnishings
2822 GREENGUARD Certification Program Method For Measuring And Evaluating Chemical Emissions From Cleaners And Cleaning Maintenance Systems Using Dynamic Environmental Chambers
2823 GREENGUARD Certification Program Method for Measuring and Evaluating Chemical and Particle Emissions From Electronic Equipment Using Dynamic Environmental Chambers
2824 GREENGUARD Certification Program Method For Measuring Microbial Resistance From Various Sources Using Static Environmental Chambers
2825 Outline of Investigation for Resiliency of Network Infrastructure Components
2826 Standard for Sustainability for Paperboard
2829 Standard for Sustainability for Laundry Bleach
2830 Standard for Sustainability for Septic Tank Additives: Alternative
2831 US Naval Commercial Off the Shelf (COTS) Three-Pole, Rated Maximum Voltage 4.76, 8.25, and 15kV, AC, Vacuum Circuit Breakers, Drawout Type, without Internal Overcurrent Protection, and Accessories/Components for Use on Non-Nuclear Naval Combatant Ships
2839 Environmental Claim Validation Procedure for Halogen Free Products
2841 Outline of Investigation for Sustainability for Slate Style Tablet Computers
2845 Standard for Sustainability for Personal Care Products
2846 Standard for Fire Test of Plastic Water Distribution Plumbing Pipe for Visible Flame and Smoke Characteristics
2849 Outline of Investigation for Electric Bicycles, Electrically Power Assisted Cycles (EPAC Bicycles), Electric Scooters, and Electric Motorcycles
2849 Outline of Investigation for Pedal Electric Cycles (Pedelecs)
2851 Outline of Investigation for Low-voltage Distribution Systems and Equipment for Desk and Similar Work-surface Installations
2852 Outline of Investigation for Validation Protocol for Flaming and Smoldering Polyurethane Foam
2854 Standard for Sustainability for Renewable Low-Impact Electricity Products
2855 Outline of Investigation for Folding Rollaway Tool Carts
2860 Environmental Claim Validation Procedure (ECVP) for Calculation of Recycling and Recovery Rate
2861 Environmental Claim Validation Procedure (ECVP) for Calculation of Ozone Depleting Substances (ODS) Destruction Efficiency
2871 Outline of Investigation for Electric Vehicle (EV) Service and Production Chargers
2872 Outline of Investigation for Heat Detecting Circuit Interrupters
2874 Outline of Investigation for Electric Motors for Use in Hazardous (Classified) Locations - Protection by Pressurized Atmosphere Maintained above the UFL
2875 Outline of Investigation for Modular Cable System Assemblies and Fittings for Industrial Control, Signal and Power Distribution
2876 Outline of Investigation for Remote Racking Devices for Switchgear and Controlgear
2877 Power Supplies, Medium Voltage
2879 Outline of Investigation for Nitrogen Generator Units for Use with Dry Pipe Sprinkler Systems
2880 Outline of Investigation for Limited-Power Wire and Cable Using Copper-Clad Aluminum Conductors
2882 Outline of Investigation for Radio Head Cable
2883 Standard for Sustainability for Disposable Wipers
2884 Environmental Claim Validation Procedure for Substance Content Claims
2885 Outline of Investigation for Acid Gas, Acidity and Conductivity of Combusted Materials and Assessment of Halogens
2889 Electrically Operated Attic Lifts
2891 Outline of Investigation for Indoor Air Quality for Building Interiors
Jan-00 Standard for Software Cybersecurity for Network-Connectable Products, Part 1: General Requirements
2900-02-01 Software Cybersecurity for Network-Connectable Products, Part 2-1: Particular Requirements for Network Connectable Components of Healthcare and Wellness Systems
2900-02-02 Outline of Investigation for Software Cybersecurity for Network-Connectable Products, Part 2-2: Particular Requirements for Industrial Control Systems
2900-02-03 Outline of Investigation for Software Cybersecurity for Network-Connectable Products, Part 2-3: Particular Requirements for Security and Life Safety Signaling Systems
2901 Standard for Antifreeze Solutions for Use in Fire Sprinkler Systems
2901A Outline of Investigation for Corrosion Control Additives for Use in Fire Sprinkler Systems
2903 Outline of Investigation for Solar Tracker Power and Control Cable
2904 Standard Method for Testing and Assessing Particle and Chemical Emissions from 3D Printers
2908 Environmental Claim Validation Procedure (ECVP) for Determining Particle Removal for Non-Filter Electrical Appliances
2930 Outline of Investigation for Cord-and-Plug-Connected Health Care Facility Outlet Assemblies
2932 Outline of Investigation for Health Risk Assessment Process Requirements for Personal Care Products
2949 Estimating Energy Use of a Display
2980 Zero Ozone Depleting Substances (ODS) Manufacturing Process
2984 Standard for Management of Public Risks - Principles and Guidelines
2985 Sustainability Outline for Thermal Inslation
2986 Recommended Practice for Measuring Incident Energy Exposure
2987 Outline of Investigation for Steel Sprinkler Pipe Corrosion Indicators
2988 Outline of Investigation for Universal Hybrid Power and Signal/Control Cables
2989 Outline of Investigation for Tracer Wire
2990 By-Product Synergy
2991 Standard for Sustainability of Absorbent
2992 Environmental Claim Validation Procedure (ECVP) for Determination and Verification of Chemical Emissions from Water Activated Flameless Heat Packets
2994 Environmental Claim Validation Procedure (ECVP) for Particulate, Mold, Bacteria, and/or Allergen Filtration Efficacy for Air Filters
2996 IN-GROUND BOXES
2996 Outline of Investigation for In-Ground Boxes
2997 Environmental Claim Validation Procedure (ECVP) for Determination and Verification of Chemical and Particle Emissions from Chafing Fuel Products During Combustion
2998 Environmental Claim Validation Procedure (ECVP) for Zero Ozone Emissions from Air Cleaners
3002 Recommended Practice for Determining the Depth of Cut On a Test Probe Contacting the Spinning Blade of a Table Saw
3003 Distributed Generation Cables
3004 Outline of Investigation for Medium Voltage Junction Boxes
3030 Standard for Unmanned Aircraft Systems
3036 GREENGUARD Certification of Residential Indoor Air Quality
3100 Outline of Investigation for Automated Guided Vehicles (AGVs)
3140 Comparing Environmental Impacts of Sterilization Equipment
3200 Outline of Investigation for Performance Testing of Engine and Turbine Generators
3223 Outline of Investigation for Data Center Certification
3225 Outline of Investigation for Water Leak Detection Systems
3400 Outline of Investigation for Additive Manufacturing Facility Safety Management
3456 Outline of Investigation for Electric-Battery-Powered Carts For Commercial Use
3566 Outline of Investigation for Copper-Clad Aluminum Conductors
3600 Outline of Investigation for Measuring and Reporting Circular Economy Aspects of Products, Sites and Organizations
3703 Standard for Solar Trackers
3730 Standard for Photovoltaic Junction Boxes
3801 Outline of Investigation for Fault Limiters
3992 Outline of Investigation for Patch Cords Terminating in Eight-Position Modular Plug Connectors - Performance
3992A Outline of Investigation for Communications Cable Assemblies used in Power over Local Area Network (LAN) Cable Networks
4000 Outline of Investigation for High Speed Cables
4040 Outline of Investigation for Portable Wet-Type Dust Collectors for Collection of Combustible Metals
4041 Outline of Investigation for Outdoor Furniture
4127 Outline of Investigation for Low Voltage Battery Cable
4128 Outline of Investigation for Intercell and Intertier Connectors for Use in Electrochemical Battery System Applications
4143 Standard for Wind Turbine Generator - Life Time Extension (LTE)
4200A Standard for Safety for Products Incorporating Button or Coin Cell Batteries of Lithium Technologies
Jan-48 Fuseholders - Part 1: General Requirements
Apr-48 Fuseholders - Part 4: Class CC
May-48 Fuseholders - Part 5: Class G
Jun-48 Fuseholders - Part 6: Class H
Aug-48 Fuseholders - Part 8: Class J
Sep-48 Fuseholders - Part 9: Class K
Nov-48 Fuseholders - Part 11: Type C (Edison Base) and Type S Plug Fuse
Dec-48 Fuseholders - Part 12: Class R
4248-15 Fuseholders - Part 15: Class T
4248-17 Outline of Investigation for Fuseholders - Part 17: Class CF Fuses
4248-18 Outline of Investigation for Fuseholders - Part 18: Photovoltaic
4248-19 Fuseholders - Part 19: Photovoltaic Fuseholders
4299 Outline of Investigation for Power Over HDBaseT (PoH) Cables
4300 Outline of Investigation for Electrically Heated Insulated Covers for Compressed Gas Cylinders for Use in Hazardous (Classified) Locations
4500 Environmental Claim Validation Procedure (ECVP) for Cleaning Solution Savings for Floor Scrubber Machines
4703 PHOTOVOLTAIC WIRE
4703 Standard for Photovoltaic Wire
4730 Standard for Nameplate, Datasheet, and Sampling Requirements of Photovoltaic Modules
Jan-85 Low Voltage Transformers - Part 1: General Requirements
Feb-85 Low Voltage Transformers - Part 2: General Purpose Transformers
Mar-85 Low Voltage Transformers - Part 3: Class 2 and Class 3 Transformers
5500 Standard for Safety for Remote Software Updates
5703 Outline of Investigation for Determination of the Maximum Operating Temperature Rating of Photovoltaic (PV) Backsheet Materials
5770 Recommended Practice for Evaluating Cables for Use in Repeated Flexing Applications
6059 Outline of Investigation for Particular Requirements for Switches for Tools
6141 Standard for Wind Turbines Permitting Entry of Personnel
6142 Small Wind Turbine Systems
6200 Standard for Controllers for Use in Power Production
6420 Standard for Equipment Used for System Isolation and Rated as a Single Unit
6500 Standard for Audio/Video and Musical Instrument Apparatus for Household, Commercial, and Similar General Use
6703 Standard for Connectors for Use in Photovoltaic Systems
7001 Sustainability Standard for Household Refrigeration Appliances
7002 Sustainability Standard for Household Portable and Floor Care Appliances
7003 Sustainability Standard for Household Clothes Washers
7004 Sustainability Standard for Household Cooking Appliances
7005 Sustainability Standard for Household Clothes Drying Appliances
7006 Sustainability Standard for Household Room Air Conditioning Appliances
7007 Sustainability Standard for Household Microwave Oven Appliances
7008 Sustainability Standard for Household Dehumidifier Appliances
7008 Sustainability Standard for Household Dehumidifier Appliances
7010 Environmental Claim Validation Procedure (ECVP) for Formaldehyde Reduction
7103 Outline of Investigation for Building-Integrated Photovoltaic Roof Coverings
Jan-00 Outline of Investigation for Portable Pneumatic Tools
7700-02-01 Outline of Investigation for Portable Pneumatic Tools; Part 2: Particular Requirements for Drills and Rotary Hammers
7700-02-02 Outline of Investigation for Portable Pneumatic Tools; Part 2: Particular Requirements for Screwdrivers, Ratchets and Impact Wrenches
7700-02-03 Outline of Investigation for Portable Pneumatic Tools; Part 2: Particular Requirements for Grinders
7700-02-04 Outline of Investigation for Portable Pneumatic Tools; Part 2: Particular Requirements for Sanders, Polishers and Buffers
7700-02-05 Outline of Investigation for Portable Pneumatic Tools; Part 2: Particular Requirements for Circular Saws and Circular Knives
7700-02-06 Outline of Investigation for Portable Pneumatic Tools; Part 2: Particular Requirements for Percussion Tools and Percussion Hammers
7700-02-08 Outline of Investigation for Portable Pneumatic Tools; Part 2: Particular Requirements for Shears and Nibblers
7700-02-11 Outline of Investigation for Portable Pneumatic Tools; Part 2: Particular Requirements for Reciprocating Saws
7700-02-14 Outline of Investigation for Portable Pneumatic Tools; Part 2: Particular Requirements for Planers
7700-02-17 Outline of Investigation for Portable Pneumatic Tools; Part 2: Particular Requirements for Routers and Trimmers
7700-2-30 Outline of Investigation for Portable Pneumatic Tools; Part 2: Particular Requirements for Nailers, Staplers and Other Fastening Tools
7700-2-33 Outline of Investigation for Portable Pneumatic Tools; Part 2: Particular Requirements for Portable Band Saws
7700-2-37 Outline of Investigation for Pneumatic Tools; Part 2: Particular Requirements for Plate Jointers
8139 Standard for Electrical Systems of Electronic Cigarettes and Vaping Devices
8203 Outline of Investigation for Performance Testing for Ingress of Fibrous Indoor Dust
8521 Outline of Investigation for Aboveground Container Refueling Systems for LP-Gas
8703 Outline of Investigation for Concentrator Photovoltaic Modules and Assemblies
8750 Standard for Light Emitting Diode (LED) Equipment for Use in Lighting Products
8752 Organic Light Emitting Diode (OLED) Panels
8752 Standard for Organic Light Emitting Diode (OLED) Panels
8753 Standard for Field-Replaceable Light Emitting Diode (LED) Light Engines
8753 Field-Replaceable Light Emitting Diode (LED) Light Engines
8754 Standard for Holders, Bases, and Connectors for Solid-State (LED) Light Engines and Arrays
8754 Holders, Bases, and Connectors for Solid-State (LED) Light Engines and Arrays
8782 Outline of Investigation for Pollution Control Units for Commercial Cooking Operations
8800 Standard for Horticultural Lighting Equipment And Systems
9540 Standard for Energy Storage Systems and Equipment
9540A Test Method for Evaluating Thermal Runaway Fire Propagation in Battery Energy Storage Systems
9703 Outline of Investigation for Distributed Generation Wiring Harnesses
9741 Outline of Investigation for Bidirectional Electric Vehicle (EV) Charging System Equipment
9798 Environmental Claim Validation Procedure (ECVP) for Biobased Content
9990 Outline of Investigation for Information and Communication Technology (ICT) Power Cables
10377 Standard for Consumer Product Safety - Guidelines for Suppliers
116875 Outline of Investigation for Lead (Pb) Content Verification of Products in Contact with Potable Water
120002 Certificate Standard for AEx Equipment for Hazardous (Classified) Locations
120101 Standard for Definitions and Information Pertaining to Electrical Equipment in Hazardous Locations
120202 Recommendations for the Preparation, Content, and Organization of Intrinsic Safety Control Drawings
120404 Pressurized Enclosures
121201 Nonincendive Electrical Equipment for Use in Class I and II, Division 2 and Class III, Divisions 1 and 2 Hazardous (Classified) Locations
121203 Portable Electronic Products Suitable for Use in Class I and II, Division 2, Class I, Zone 2 and Class III, Division 2 and 2 Hazardous (Classified) Locations
122001 General Requirements for Electrical Ignition Systems for Internal Combustion Engines in Class I, Division 2 or Zone 2, Hazardous (Classified) Locations
122701 Standard for Requirements for Process Sealing Between Electrical Systems and Flammable or Combustible Process Fluids
12402-5 Standard for Personal Flotation Devices - Part 5: Buoyancy Aids (Level 50) - Safety Requirements
12402-9 ANSI/CAN/UL Standard for Personal Flotation Devices - Part 9: Test Methods
60034-1 Standard for Rotating Electrical Machines - Part 1: Rating and Performance
60034-2-1 Standard for Rotating Electrical Machines - Part 2-1: Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles)
60034-5 Standard for Rotating Electrical Machines - Part 5: Degrees of Protection Provided by the Integral Design of Rotating Electrical Machines (IP Code) - Classification
60065 Standard for Audio, Video and Similar Electronic Apparatus - Safety Requirements
60079-0 Standard for Explosive Atmospheres - Part 0: Equipment - General Requirements
60079-0 Explosive Atmospheres - Part 0: Equipment - General Requirements
60079-1 Standard for Explosive Atmospheres - Part 1: Equipment Protection by Flameproof Enclosures “d”
60079-1 Explosive Atmospheres - Part 1: Equipment Protection by Flameproof Enclosures “d”
60079-2 Standard for Explosive atmospheres - Part 2: Equipment protection by pressurized enclosure 'p'
60079-2 Explosive Atmospheres - Part 2: Equipment Protection by Pressurized Enclosure “p”
60079-5 Standard for Explosive atmospheres - Part 5: Equipment protection by powder filling “q”
60079-6 Standard for Explosive Atmospheres - Part 6: Equipment Protection by Liquid Immersion 'o'
60079-7 Standard for Explosive Atmospheres - Part 7: Equipment Protection by Increased Safety ''e''
60079-7 Explosive Atmospheres - Part 7: Equipment protection by increased safety 'e'
60079-11 Explosive Atmospheres - Part 11: Equipment Protection by Intrinsic Safety 'i'
60079-15 Explosive atmospheres - Part 15: Equipment protection by type of protection 'n'
60079-17 Standard for Explosive Atmospheres - Part 17: Electrical Installations Inspection and Maintenance
60079-18 Standard for Explosive Atmospheres - Part 18: Equipment Protection by Encapsulation 'm'
60079-18 Explosive atmospheres - Part 18: Equipment protection by encapsulation “m”
60079-25 Explosive Atmospheres - Part 25: Intrinsically Safe Electrical Systems
60079-26 Standard for Explosive Atmospheres - Part 26: Equipment with Equipment Protection Level (EPL) Ga
60079-28 Standard for Explosive Atmospheres - Part 28: Protection of Equipment and Transmission Systems Using Optical Radiation
60079-29-1 Explosive Atmospheres - Part 29-1: Gas Detectors - Performance Requirements of Detectors for Flammable Gases
60079-29-2 Explosive Atmospheres - Part 29-2: Gas Detectors - Selection, Installation, Use and Maintenance of Detectors for Flammable Gases and Oxygen
60079-29-4 Explosive Atmospheres - Part 29-4: Gas Detectors - Performance Requirements of Open Path Detectors for Flammable Gases
60079-30-1 Standard for Explosive Atmospheres - Part 30-1: Electrical Resistance Trace Heating - General and Testing Requirements
60079-31 Explosive Atmospheres - Part 31: Equipment Dust Ignition Protection by Enclosure “t”
60086-4 Standard For Safety For Primary Batteries - Part 4: Safety Of Lithium Batteries
60320-1 Appliance Couplers for Household and Similar General Purposes - Part 1: General Requirements
60320-3 Appliance Couplers for Household and Similar General Purposes - Part 3: Standard Sheets and Gauges
60335-1 Safety of Household and Similar Appliances, Part 1: General Requirements
60335-1 Safety of Household and Similar Appliances, Part 1: General Requirements
60335-2-3 Standard for Safety of Household and Similar Electrical Appliances, Part 2: Particular Requirements for Electric Irons
60335-2-8 Standard for Household and Similar Electrical Appliances - Safety - Part 2-8: Particular Requirements for Shavers, Hair Clippers, and Similar Appliances
60335-2-8 Standard for Safety for Household and Similar Electrical Appliances, Part 2: Particular Requirements for Shavers, Hair Clippers, and Similar Appliances
60335-2-24 Household and Similar Electrical Appliances - Safety - Part 2-24: Particular Requirements for Refrigerating Appliances, Ice-Cream Appliances and Ice-Makers
60335-2-24 Safety Requirements for Household and Similar Electrical Appliances, Part 2: Particular Requirements for Refrigerating Appliances, Ice-Cream Appliances and Ice-Makers
60335-2-34 Household and Similar Electrical Appliances - Safety - Part 2-34: Particular Requirements for Motor-Compressors
60335-2-34 Safety of Household and Similar Electrical Appliances, Part 2-34: Particular Requirements for Motor-Compressors
60335-2-34 Standard for Household and Similar Electrical Appliances, Part 2: Particular Requirements for Motor-Compressors
60335-2-40 Household And Similar Electrical Appliances - Safety - Part 2-40: Particular Requirements for Electrical Heat Pumps, Air-Conditioners and Dehumidifiers
60335-2-67 Household and Similar Appliances - Safety - Part 2-67: Particular requirements for floor treatment machines, for commercial use
60335-2-72 Household and Similar Electrical Appliances - Safety - Part 2-72: Particular Requirements for Floor Treatment Machines With or Without Traction Drive, for Commercial Use
60335-2-79 Household and Similar Electrical Appliances - Safety - Part 2-79: Particular Requirements for High Pressure Cleaners and Steam Cleaners
60335-2-89 Household and Similar Electrical Appliances - Safety - Part 2-89: Particular Requirements for Commercial Refrigerating Appliances with an Incorporated or Remote Refrigerant Unit or Compressor
60335-2-1000 Standard for Household and Similar Electrical Appliances: Particular Requirements for Electrically Powered Pool Lifts
60384-14 Safety Requirements for Fixed Capacitors for Use in Electronic Equipment - Part 14: Sectional Specification: Fixed Capacitors for Electromagnetic Interference Suppression and Connection to the Supply Mains
60601-1 Medical Electrical Equipment, Part 1: General Requirements for Safety
60691 Standard for Thermal-Links - Requirements and Application Guide
60692 Outline of Investigation for Circuit Interrupters with Fire Extinguishing Agent for Use in Electrical Appliances and Components
60730-1 Automatic Electrical Controls - Part 1: General Requirements
60730-1 Automatic Electrical Controls for Household and Similar Use - Part 1: General Requirements
60730-2-3 Standard for Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Thermal Protectors for Ballasts for Tubular Fluorescent Lamps
60730-2-3 Standard for Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Thermal Protectors for Ballasts for Tubular Fluorescent Lamps
60730-2-4 Standard for Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Thermal Motor Protectors for Motor-Compressors of Hermetic and Semi-Hermetic Type
60730-2-5 Automatic Electrical Controls for Household and Similar Use, Part 2-5: Particular Requirements for Automatic Electrical Burner Control Systems
60730-2-6 Standard for Automatic Electrical Controls - Part 2-6: Particular Requirements for Automatic Electrical Pressure Sensing Controls Including Mechanical Requirements
60730-2-6 Standard for Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Automatic Electrical Pressure Sensing Controls Including Mechanical Requirements
60730-2-7 Standard for Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Timers and Time Switches
60730-2-7 Standard for Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Timers and Time Switches
60730-2-8 Standard for Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Electrically Operated Water Valves, Including Mechanical Requirements
60730-2-9 Standard for Automatic Electrical Controls - Part 2-9: Particular Requirements for Temperature Sensing Controls
60730-2-9 Standard for Automatic Electrical Controls for Household and Similar Use - Part 2-9: Particular Requirements for Temperature Sensing Controls
60730-2-10 Standard for Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Motor Starting Relays
60730-2-10A Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Motor Starting Relays
60730-2-11 Standard for Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Energy Regulators
60730-2-11A Standard for Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Energy Regulators
60730-2-12 Standard for Automatic Electrical Controls - Part 2-12: Particular Requirements for Electrically Operated Door Locks
60730-2-13 Standard for Automatic Electrical Controls - Part 2-13: Particular Requirements for Humidity Sensing Controls
60730-2-13A Standard for Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Humidity Sensing Controls
60730-2-14 Automatic Electrical Controls - Part 2-14: Particular Requirements for Electric Actuators
60730-2-14 Standard for Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Electric Actuators
60730-2-15 Standard for Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Automatic Electrical Air Flow, Water Flow and Water Level Sensing Controls
60730-2-15 Standard for Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Automatic Electrical Air Flow, Water Flow and Water Level Sensing Controls
60730-2-16A Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Automatic Electrical Water Level Controls
60730-2-18 Standard for Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Automatic Electrical Water and Air Flow Sensing Controls Including Mechanical Requirements
60730-2-22 Standard for Automatic Electrical Controls - Part 2-22: Particular Requirements for Thermal Motor Protectors
60745-1 Hand-Held Motor-Operated Electric Tools - Safety - Part 1: General Requirements
60745-2-1 Hand-Held Motor-Operated Electric Tools - Safety - Part 2-1: Particular Requirements for Drills and Impact Drills
60745-2-2 Hand-Held Motor-Operated Electric Tools - Safety - Part 2-2: Particular Requirements for Screwdrivers and Impact Wrenches
60745-2-3 Hand-Held Motor-Operated Electric Tools - Safety - Part 2-3: Particular Requirements for Grinders, Polishers and Disk-Type Sanders
60745-2-4 Hand-Held Motor-Operated Electric Tools - Safety - Part 2-4: Particular Requirements for Sanders and Polishers Other Than Disk Type
60745-2-5 Hand-Held Motor-Operated Electric Tools - Safety - Part 2-5: Particular Requirements for Circular Saws
60745-2-6 Hand-Held Motor-Operated Electric Tools - Safety - Part 2-6: Particular Requirements for Hammers
60745-2-8 Hand-Held Motor-Operated Electric Tools Safety - Part 2-8: Particular Requirements for Shears and Nibblers
60745-2-9 Hand-Held Motor-Operated Electric Tools - Safety - Part 2-9: Particular Requirements for Tappers
60745-2-11 Hand-Held Motor-Operated Electric Tools - Safety - Part 2-11: Particular Requirements for Reciprocating Saws
60745-2-12 Hand-Held Motor-Operated Electric Tools - Safety - Part 2-12: Particular Requirements For Concrete Vibrators
60745-2-13 Hand-Held Motor-Operated Electric Tools - Safety - Part 2-13: Particular Requirements for Chain Saws
60745-2-14 Hand-Held Motor-Operated Electric Tools - Safety - Part 2-14: Particular Requirements for Planers
60745-2-15 Hand-Held Motor-Operated Electric Tools - Safety - Part 2-15: Particular Requirements for Hedge Trimmers
60745-2-16 Hand-Held Motor-Operated Electric Tools - Safety - Part 2-16: Particular Requirements for Tackers
60745-2-17 Hand-Held Motor-Operated Electric Tools - Safety - Part 2-17: Particular Requirements for Routers and Trimmers
60745-2-18 Hand-Held Motor-Operated Electric Tools - Safety - Part 2-18: Particular Requirements For Strapping Tools
60745-2-19 Hand-Held Motor-Operated Electric Tools - Safety - Part 2-19: Particular Requirements For Jointers
60745-2-20 Hand-Held Motor-Operated Electric Tools - Safety - Part 2-20: Particular Requirements For Band Saws
60745-2-21 Hand-Held Motor-Operated Electric Tools - Safety - Part 2-21: Particular Requirements For Drain Cleaners
60745-2-22 Hand-Held Motor-Operated Electric Tools - Safety - Part 2-22: Particular Requirements For Cut-Off Machines
60745-2-23 Hand-Held Motor-Operated Electric Tools - Safety - Part 2-23: Particular Requirements for Die Grinders and Small Rotary Tools
60855-1 Live working - Insulating foam-filled tubes and solid rods - Part 1: Tubes and rods of a circular cross-section
60939-3 Standard for Passive Filter Units for Electromagnetic Interference Suppression - Part 3: Passive Filter Units for Which Safety Tests are Appropriate
60947-1 Low-Voltage Switchgear and Controlgear - Part 1: General rules
60947-4-1 Low-Voltage Switchgear and Controlgear - Part 4-1: Contactors and Motor-Starters - Electromechanical Contactors and Motor-Starters
60947-4-2 Low-Voltage Switchgear and Controlgear - Part 4-2: Contactors and Motor-Starters - AC Semiconductor Motor Controllers and Starters
60947-5-1 Low-Voltage Switchgear and Controlgear - Part 5-1: Control Circuit Devices and Switching Elements - Electromechanical Control Circuit Devices
60947-5-2 Low-Voltage Switchgear and Controlgear - Part 5-2: Control Circuit Devices and Switching Elements - Proximity Switches
60947-5-5 Standard for Low-Voltage Switchgear and Controlgear - Part 5-5: Control circuit devices and switching elements - Electrical emergency stop device with mechanical latching function
60947-7-1 Low-voltage switchgear and controlgear - Part 7-1: Ancillary equipment - Terminal blocks for copper conductors
60947-7-2 Low-Voltage Switchgear and Controlgear - Part 7-2: Ancillary Equipment - Protective Conductor Terminal Blocks for Copper Conductors
60947-7-3 Low-Voltage Switchgear and Controlgear - Part 7-3: Ancillary Equipment - Safety Requirements for Fuse Terminal Blocks
60947-7-4 Low-Voltage Switchgear and Controlgear - Part 7-4: Ancillary equipment - PCB terminal blocks for copper conductors
60950-1 Information Technology Equipment - Safety - Part 1: General Requirements
60950-21 Information Technology Equipment - Safety - Part 21: Remote Power Feeding
60950-22 Information Technology Equipment - Safety - Part 22: Equipment to be Installed Outdoors
60950-23 Information Technology Equipment - Safety - Part 23: Large Data Storage Equipment
60974-1 Standard for Arc Welding Equipment; Part 1: Welding Power Sources
61010-1 Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 1: General Requirements
61010-2-10 Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory Use - Part 2-010: Particular Requirements for Laboratory Equipment for the Heating of Materials
61010-2-11 Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 2-011: Particular Requirements for Refrigerating Equipment
61010-2-12 Standard for Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory Use - Part 2-012: Particular Requirements for Climatic and Environmental Testing and Other Temperature Conditioning Equipment
61010-2-20 Standard for Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 2-020: Particular Requirements for Laboratory Centrifuges
61010-2-30 Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 2-030: Particular Requirements for Equipment Having Testing or Measuring Circuits
61010-2-32 Standard for Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory Use - Part 2-032: Particular Requirements for Hand-Held and Hand-Manipulated Current Sensors for Electrical Test and Measurement
61010-2-33 Standard for Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 2-033: Particular Requirements for Hand-Held Multimeters and Other Meters, for Domestic and Professional Use, Capable of Measuring Mains V
61010-2-40 Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 2-040: Particular Requirements for Sterilizers and Washer-Disinfectors Used To Treat Medical Materials
61010-2-51 Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory Use - Part 2-051: Particular Requirements for Laboratory Equipment for Mixing and Stirring
61010-2-61 Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory Use - Part 2-061: Particular Requirements for Laboratory Atomic Spectrometers with Thermal Atomization and Ionization
61010-2-81 Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory Use - Part 2-081: Particular Requirements for Automatic and Semi-Automatic Laboratory Equipment for Analysis and Other Purposes
61010-2-91 Standard for Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 2-091: Particular Requirements for Cabinet X-Ray Systems
61010-2-101 Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory Use - Part 2-101: Particular Requirements for In Vitro Diagnostic (IVD) Medical Equipment
61010-2-201 Standard for Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 2-201: Particular Requirements for Control Equipment
61010-31 Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory Use - Part 031: Safety Requirements for Hand-Held Probe Assemblies for Electrical Measurement and Test
61058-1 Switches for Appliances - Part 1: General Requirements
61058-1-1 Switches for Appliances - Part 1-1: Requirements for Mechanical Switches
61058-1-2 Switches for Appliances - Part 1-2: Requirements for Electronic Switches
61131-2 Standard for Programmable Controllers - Part 2: Equipment Requirements and Tests
61215-1 Terrestrial Photovoltaic (PV) Modules - Design Qualification and Type Approval - Part 1: Test requirements
61215-1-1 Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-1: Special requirements for testing of crystalline silicon photovoltaic (PV) modules
61215-1-2 Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-2: Special requirements for testing of thin-film Cadmium Telluride (CdTe) based photovoltaic (PV) modules
61215-1-3 Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-3: Special requirements for testing of thin-film amorphous silicon based photovoltaic (PV) modules
61215-1-4 Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-4: Special requirements for testing of thin-film Cu(In,Ga)(S,Se)2 based photovoltaic (PV) modules
61215-2 Terrestrial Photovoltaic (PV) Modules - Design Qualification and Type Approval - Part 2: Test procedures
61496-1 Standard for Electro-Sensitive Protective Equipment, Part 1: General Requirements and Tests
61496-2 Standard for Electro-Sensitive Protective Equipment, Part 2: Particular Requirements for Equipment Using Active Opto-Electronic Protective Devices (AOPDs)
61724-1 Standard for Photovoltaic System Performance - Part 1: Monitoring
61724-2 Standard for Photovoltaic System Performance - Part 2: Capacity Evaluation Method
61724-3 Standard for Photovoltaic System Performance - Part 3: Energy Evaluation Method
61730-1 Photovoltaic (PV) Module Safety Qualification - Part 1: Requirements for Construction
61730-2 Photovoltaic (PV) Module Safety Qualification - Part 2: Requirements for Testing
61800-5-1 Standard for Adjustable Speed Electrical Power Drive Systems - Part 5-1: Safety Requirements - Electrical, Thermal and Energy
61800-5-2 Standard for Adjustable Speed Electrical Power Drive Systems - Part 5-2: Safety Requirements - Functional
61810-1 Standard for Electromechanical Elementary Relays - Part 1: General Requirements
61965 Mechanical Safety for Cathode Ray Tubes
62093 Balance-of-System Components for Photovoltaic Systems - Design Qualification Natural Environments
62108 Concentrator Photovoltaic (CPV) Modules and Assemblies - Design Qualification and Type Approval
62109-1 Standard for Safety of power converters for use in photovoltaic power systems - Part 1: General requirements
62133 Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes - Safety Requirements for Portable Sealed Secondary Cells, and for Batteries Made From Them, for Use in Portable Applications
62275 Cable Management Systems - Cable Ties for Electrical Installations
62368-1 Audio/video, information and communication technology equipment - Part 1: Safety requirements
62368-1 Audio/video, information and communication technology equipment - Part 1: Safety requirements
62841-1 Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery - Safety - Part 1: General Requirements
62841-2-1 Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery - Safety - Part 2-1: Particular Requirements For Hand-Held Drills and Impact Drills
62841-2-2 Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery - Safety - Part 2-2: Particular Requirements For Hand-Held Screwdrivers And Impact Wrenches
62841-2-4 Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery - Safety - Part 2-4: Particular Requirements For Hand-Held Sanders And Polishers Other Than Disc Type
62841-2-5 Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery - Safety - Part 2-5: Particular Requirements for Hand-Held Circular Saws
62841-2-8 Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery - Safety - Part 2-8: Particular Requirements For Hand-Held Shears and Nibblers
62841-2-9 Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery - Safety - Part 2-9: Particular Requirements For Hand-Held Tappers And Threaders
62841-2-10 Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery - Safety - Part 2-10: Particular Requirements For Hand-Held Mixers
62841-2-11 Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery - Safety - Part 2-11: Particular Requirements For Hand-Held Reciprocating Saws
62841-2-14 Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery - Safety - Part 2-14: Particular Requirements For Hand-Held Planers
62841-2-17 Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 2-17: Particular Requirements for Hand-Held Routers
62841-2-21 Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery - Safety - Part 2-21: Particular Requirements For Hand-Held Drain Cleaners
62841-3-1 Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery - Safety - Part 3-1: Particular Requirements For Transportable Table Saws
62841-3-4 Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery - Safety - Part 3-4: Particular Requirements For Transportable Bench Grinders
62841-3-6 Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery - Safety - Part 3-6: Particular Requirements For Transportable Diamond Drills With Liquid System
62841-3-9 Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery - Safety - Part 3-9: Particular Requirements For Transportable Mitre Saws
62841-3-10 Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery - Safety - Part 3-10: Particular Requirements For Transportable Cut-Off Machines
62841-3-12 Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 3-12: Particular Requirements for Transportable Threading Machines
62841-3-13 Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery - Safety - Part 3-13: Particular Requirements For Transportable Drills
62841-3-14 Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery - Safety - Part 3-14: Particular Requirements for Transportable Drain Cleaners
62841-3-1000 Outline of Investigation for Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery - Safety - Part 3-1000: Particular Requirements For Transportable Laser Engravers
62841-4-2 Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery - Safety - Part 4-2: Particular Requirements For Hedge Trimmers
62841-4-1000 Outline of Investigation for Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery - Safety - UL 62841-4-1000: Particular Requirements For Utility Machines
63345 Outline of Investigation for Buoyant Media for Protection Against Full Surface Fires in Fixed Flammable or Combustible Liquid Tanks or Repositories
67377 Outline of Investigation for Oxygen Reduction Fire Protection System Units
920001 Performance Requirements for Toxic Tas Detectors
920002 Installation, Operation, and Maintenance of Toxic Gas-Detection Instruments
920004 Performance Requirements for Open Path Toxic Gas Detectors
920401 Performance Requirements for Instruments Used to Detect Oxygen-Deficient/Oxygen-Enriched Atmospheres

 

https://korea.ul.com/

 

한국 UL Korea

UL, 유엘, UL Korea, UL 인증, 유엘코리아, 해외인증, 전세계인증, UL MARK

korea.ul.com

 

반응형

'방재영역 > 화재 코드' 카테고리의 다른 글

NFPA 77, Recommended Practice On Static Electcity-1  (0) 2020.06.05
IFC(International Fire code) 2018 무료 홈페이지  (0) 2019.12.18
UL Standard list  (0) 2019.12.11
FM Global Data Sheets  (0) 2019.12.11
NFPA Code list  (0) 2019.12.11

태그

댓글0